Recently Viewed

Fluid Etch Aerosol

Fluid Etch Aerosol
  Zoom
Fluid Etch AerosolFluid Etch AerosolFluid Etch Aerosol
Our Price:  £14.99(Inc. 20% VAT)(£12.49 Exc. VAT)Earn 14 Loyalty Points
+

Availability:  

  

Chassis Black Satin CIO Chassis In OneChassis Black Satin CIO Chassis In One
  (2 Reviews)

Fluid Etch Primer

A superb advanced etch primer that also functions as a high adhesion, high build primer in its own right.

Fluid etch can be used direct to NEW GALV, and aluminium, as well as corrosion free surfaces. More points:-

  • Direct to new galv
  • Direct to aluminium and stainless steel
  • Does not require top coating
  • Compatible with ALL Buzzweld top coats including Upol Raptor Bedliner,
  • Presents a highly textured surface for optimal adhesion by top coat if required (can be refinished for different finish level)
  • Uses a two stage loading process developed in-house by Buzzweld to overcome existing limitations on Aerosol capabilites
  • Fast Cure times
  • Superb as an adhesion promoter on aluminium treadplate where it can be hard to provide an effective key
  • High Build
  • Will adhere to many existing coatings, even un-prepared (must be free of contamination)

400ML Aerosol

Always do a test patch to test comatibility.

 

Average Rating (2 Reviews):  
Write a Review and share your opinions!

Rating:  
etch primer
Wednesday, 13 September 2017  | 

Very good product will be using again

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Fluid Etch Review In Depth
Sunday, 15 January 2017  | 

Products used-
-Buzzweld fluid Etch aerosol- primer 1 can per a wheel 4 in total
-Buzzweld red aerosol gloss - top coat 1 can per a wheel 4 in total
Metal being painted-
Galvnised wheel rims
Method used-
Cleaned using trichloroethane to remove all oils
Lightly wire brushed and rubbed down using 240 W&D roughing the surface up
Cleaned again using trichloroethane to remove any oils from sweat on hands
Preheated to 80c in the oven
Fluid etech shaken for 3mimutes, applied and put back in the oven for 2 hours
Lightly rubbed down with 300grit W&D
Buzzweld red shaking for 3 minutes apply now left in oven for 4 hours at 80c to cure.
Seal in air tight bag and store ready for use
Review on buzzweld fluid etch
-:Sprays easy but sometimes can block the nozzle found shaking the can like mad whilst spraying it clears the nozzle and prevents it blocking again, leaves a fine grit finish, touch dry in a minute or two, lightly rubbing it down give a better top coat finish.
Would I use it again Y/N, yes
Finish, 8/10
Dry time 10/10
Easy to apply, yes
Finish, fine sand
Valve 5/5 (struggle to buy a good etcher for a fair price)

Was this helpful to you?  Yes  /  No

1 of 1 people found this review helpful.


Customers who bought this item also bought:


Related Products
RAPTOR: Durable Bed Liner + Protective Coating TINTABLE glass flake optional

RAPTOR: Durable Bed Liner + Protective Coating TINTABLE glass flake optionalFrom:  £23.99

  (2)

The toughest UPOL Raptor in the world. By Buzzweld.

RAPTOR: Durable Bed Liner + Protective Coating BLACK glass flake optional

RAPTOR: Durable Bed Liner + Protective Coating BLACK glass flake optionalFrom:  £23.99

  (1)

Also available with a range of primers for specific purposes

Quora 2K Resin+ Aerosol

Quora 2K Resin+ Aerosol£19.99

2 pack modified aerosol

UPOL ACID#8 Etch Primer Aerosol 450ml Acid 8 U-POL

UPOL ACID#8 Etch Primer Aerosol 450ml Acid 8 U-POL£14.99   £12.99

Upol Acid Etch #8

SALE
Rust Encapsulator

Rust EncapsulatorFrom:  £9.99

  (2)

Fast cure, direct to Galv and Rust

Chassis Black Satin CIO Chassis In One

Chassis Black Satin CIO Chassis In OneFrom:  £9.99

  (41)

Direct to rust, and leaves a superb tough satin finsh. Does almost everything!


Buzzweld Automotive Protection
BUZZWELD COATINGS
Search: