Shop by Brand
Shop by Price

Heavy Duty Paint Stripper 1L

Heavy Duty Paint Stripper 1L
Our Price:  £11.99(Inc. 20% VAT)(£9.99 Exc. VAT)Earn 11 Loyalty Points

Brand:  Buzzweld



Brushable Seam Sealer 1KGBrushable Seam Sealer 1KG
Chassis paint / undersealing / fibreglass BrushesChassis paint / undersealing / fibreglass Brushes
  (2 Reviews)


This is a heavy duty paint and varnish remover. Using a high vscosity (thick) gel formulation means our paint stripper is ideal for vertical surfaces. 


  • Provides a thick even application
  • Deep penetration
  • Non-acidic and Non Caustic
  • Fast, safe and easy way to remove existing paints and varnishes
  • effective on enamels,, varnishes, shellac (including rust converters), cellulose, plastic coatings, lacquers, stove finishes, polyurethanes, emulsion paints, synthetic finishes, french polish, tar, bitumens, underbody waxes and more.
  • Safe to use on wood, metal, plaster, stone and concrete.
  • Non flammable
  • working temperature between 5>28c typically.
  • close can immediatley after use for best long term performance.
  • 2>3 m2 per liter.


penetration and eruption of coating can vary wildly based on product type and thickness. 5>20 minutes would be typical for most types and thicknesses.

apply by brush in an even application covering the substrate, and leave for 5>20 minutes.

wash down with 


use with. Other paint strippers, rubber, linoleum, polystyrene, glass fibre, resin, plastic or vinyl covering, synthetic fabrics, asphalt, perspex, spectacle lenses


Average Rating (2 Reviews):  
Write a Review and share your opinions!

Totally satisfied - couldn't have asked for better.
Friday, 14 December 2018  | 

Stripping of Powder Coating

Just wanted to share with you some excellent feedback about the paint stripper. I applied the paint stripper today on two top mud guard checker plate panels. The results were astounding to say the least. Buzzweld heavy duty stripper flaked the powder coating in minutes, allowing me to very easily remove the remnants of the powder coating using a mild force with a steel brush. There were of course the odd small spots that required a second application. After that and with simple brushing using a steel brush, the checker plate panels were spotless shiny stainless steel. Sadly I was so excited about all this that I forgot to take pictures.

I applied a coat of Acid etch and started painting these panels with CIO satin finish. Am planning to apply two other coats before fitting back again.


This review has not been appraised.

Strong Stuff!
Sunday, 9 December 2018  | 

worked on taking new powder coat off alloy wheels.

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Customers who bought this item also bought: