Shop by Brand
Shop by Price

Refinishing Kit

Refinishing Kit
Refinishing KitRefinishing KitRefinishing Kit
Our Price:  £49.99
List Price:  £52.65
Saving Of:  £2.66
(Inc. 20% VAT)(£41.66 Exc. VAT)Earn 49 Loyalty Points
Filling Primer Rapid Build:  
Applying to Galv/ Aluminium/ Stainless?  
Contaminated surface?  

Brand:  Buzzweld

  (2 Reviews)


Buzzweld parts refinishing aerosol Kits. Suitable for everything from bumpers and towing assemblies to garden furniture. Designed to offer you lasting protection from an easy to apply aerosol solution.
Comes with market leading corrosion stabilising primer, and your choice of top coat finish.
Choose from :-
  1. Heavy duty Chassis In One satin black glass re-enforced
  2. Industrial gloss heavy duty glass flake gloss
  3. Chassis extreme gloss finish
  4. Optional Oxide-X Super build aerosol for filling in corrosion pitting
  1. Remove loose rust and existing paint
  2. Use Buzzweld Purge to clean the prepared surface of contaminants (included in kit) with a suitable cloth/scour and then wipe clean.
  3. Mask off and protect all surrounding areas and equipment
  1. using a steady motion spray from side to side until the first coat of RCP primer has fully covered the item. Leave until touch dry (10>30 minutes typically), and apply the second coat.
  2. Leave item to cure for 1>2 hours until product has hardened (in low temperatures, or poor ventilation this time can increase considerably)
  3. If corrosion pitting is evident use Oxide-X in the same motion as above to build the profile. Continue to do so until flat prior to top coating
  4. As above with the RCP use the top coat finishing aerosol to apply your first coat. Allow to touch dry for 5>20 minutes depending on conditions before applying your final top coat. 
Note. Should the finish become contaminated with debris, or dust simply allow the finish to cure and lightly refinish with 240 grit wet and dry. Re apply once flat and dry.
  1. RCP Primer
  2. Your chosen top coat aerosol
  3. Aerosol Unblocker kit
Average Rating (2 Reviews):  
Write a Review and share your opinions!

Superb Product
Friday, 17 February 2017  | 

All you need to keep the nasty rust at bay easy to use and excellent finish

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Monday, 16 January 2017  | 

So i purchased this "kit" not really knowing what was involved.

Buzzweld talked me through the entire process, pointed out some glaring holes in my plan, and advised me on this kit. With the contamination killer I removed the dinitrol, and that allowed the RCP primer included to stick properley.

Still a little uneasy that i can just paint over the rust, after taking off the loose stuff, but after using the RCP, i let that cure and followed it up with two heavy coats of the Oxide-x and that meant i could use a sanding pad and make my crossmember nice and smooth ready for the top coat. That went great, and it gave me a finish like a spray shop for a fraction of the price!!! will definetly be using another kit on my rock sliders to tidy them up, but they are galv, so i am informed i will need the fluid etch for that

Was this helpful to you?  Yes  /  No

2 of 2 people found this review helpful.

Customers who bought this item also bought:

Buzzweld Automotive Protection