Shop by Brand
Shop by Price

2K Epoxy Armour Primer Corrosion Stabilising

2K Epoxy Armour Primer Corrosion Stabilising
  Zoom
2K Epoxy Armour Primer Corrosion Stabilising2K Epoxy Armour Primer Corrosion Stabilising2K Epoxy Armour Primer Corrosion Stabilising
2K Epoxy Armour Primer Corrosion Stabilising2K Epoxy Armour Primer Corrosion Stabilising
Full Product Guide Here

Save up to 10% more by ordering in quantities of 2, 6, 12, 48

Our Price:  £45.00
List Price:  £50.00
Saving Of:  £5.00
(Inc. 20% VAT)(£37.50 Exc. VAT)Earn 45 Loyalty Points
+
VOLUME


Brand:  Buzzweld

Angle Sander kit | General Chassis PreparationAngle Sander kit | General Chassis Preparation
2k Armour Thinners2k Armour Thinners
Buzzweld Zero Prep CLEAR coat cavity wax internal / externalBuzzweld Zero Prep CLEAR coat cavity wax internal / external
  (4 Reviews)

Buzzweld


2K Armour 5000ML Elite Flagship
Single coat Extreme two pack epoxy. 

 
 
  • Sound deadener
  • 77% as hard as steel!
  • Infused with toughened glass flake for increased impermeability and abrasion resistance
  • Single Coat Direct system
  • Designed for Hand prepared Steel
  • Contains a mined pigment that converts corrosion present to inert magnetite, thus preventing further corrosion. 
  • Contains self leafing glass flake that laminate within the coating to form an impermeable barrier to oxygen and moisture.
  • Cures under-water
  • High build, solvent-less two pack epoxy, tar-free, rust stabilising primer
  • Tolerant of application to damp substrates
  • Buzzweld 2K Armour provides a very high film build by brush.
  • Buzzweld 2K Armour contains rust stabilising pigment for long term anti-corrosive protection and covnersion.
  • It has a specially designed tar-free resin system that can be applied to damp steel surfaces to aid practicality under difficult various conditions. 

Recommended for.

  • Chassis and underbody protection.
  • The highest longevity of all the primers we offer beating even RCP (RCP is easier to use, faster cure, and cheaper)
  • Keyed substrates (rough to touch, steel, not for smooth paint/ steel) or t-washed glav that has a rough profile.
Average Rating (4 Reviews):  

Rating:  
Rust protection
Thursday, 21 May 2020  | 

I have used this product before and found it very good ,it needs a lot of mixing of the 2 parts ,and it needs thining if brushing on ,dont mix more than you need, it seems to go a long way ,and covers very well , you can always mix some more, use their thinners only.
The paint is quite expensive and it sets very hard, i dont no how it will perform as a rust prevention, as i only painted the cars floors and chassis resently, time will tell.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
2k
Sunday, 15 January 2017  | 

Great product. Recently painted my chassis. Good coverage nice and thick. It brushed on well but been told since it's easier to roll on. Nice finish although I did overcoat it in CIO another great product 👌

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Superb product
Sunday, 15 January 2017  | 

Does exactly what was needed.
Thorough mixing and an even coat, then left to harden til the next day, this stuff is brilliant. Nothing compares. Nothing even comes close.
It's expensive, but it's well worth the money. I shall be buying more once I've used current tins.
Highly recommend to anyone wanting ultimate coating and protection.

 

This review has not been appraised.


Rating:  
All products
Thursday, 11 August 2016  | 

Buzz weld products are if not the best, second to none on the market.

I have used most of there range on works as small as a landrover part, up to a house boat we just finished building.

2k is amazing, being in the painting industry for over 20 years I can honestly say I used nothing as good...!

Rcp is amazing, coverage is fantastic and has fantastic adhesion and wetting out properties.

Cio is just the don, chassis in a can is an understatement.

You may think I'm linked to the company with these statements but I'm not, I just like to give credit where it's due.

If you don't want to compromise on quality, look no further, speak with Craig Jones and the customer service and product knowledge matches the product itself, top notch.

 

This review has not been appraised.

Tinned

  • 5.6M2/1000ML
  • 5000ML for a chassis and axles up to 110 size.
  • 5.6M2/1000ML if top coating a primer with a smooth substrate
  • 4.5m2/1000ML if top coating a rough substrate with no primer
  • 500ML per average wheel arch (using two coats)
:

SALE
Angle Sander kit | General Chassis Preparation

Angle Sander kit | General Chassis Preparation£68.00   £55.00

  (7)

A selection of useful abrasives complete with air tool that work on general chassis and underbody preparation

Small Mixing paddle 1000>5000ML Tins

Small Mixing paddle 1000>5000ML Tins£5.00

A must if purchasing 2K chassis Armour or other products that require mixing prior to  use.

2k Armour Thinners

2k Armour ThinnersFrom:  £16.00

Thinners for 2k Armour

Buzzweld Zero Prep CLEAR coat cavity wax internal / external

Buzzweld Zero Prep CLEAR coat cavity wax internal / externalFrom:  £5.00

  (9)

Transparent, Tough, VCI based cavity wax for 100% cavity protection and a touch dry finish.

Anti-Slip Coating additive. Bed Liner, rock sliders etc

Anti-Slip Coating additive. Bed Liner, rock sliders etc£1.99

  (1)

can be used with CIO, Gloss extreme, 2k armour, and raptor.

Seam Sealing Brush

Seam Sealing Brush£4.50   £2.50

tough white nylon bristles, Heavy Duty,

Fibreglass Resin and Catalyst 1.02L 2K

Fibreglass Resin and Catalyst 1.02L 2K£13.49   £9.99

Fibreglass 2K Resin

  


BuzzweldOpen Tue>Sat 09:30>16:30 TEL: 07540395316