Shop by Brand
Shop by Price

Aerosol Parts Refinishing Kit

Aerosol Parts Refinishing Kit
Aerosol Parts Refinishing KitAerosol Parts Refinishing KitAerosol Parts Refinishing Kit
Aerosol Parts Refinishing KitAerosol Parts Refinishing Kit
Our Price:  £37.49
List Price:  £40.46
Saving Of:  £2.97
(Inc. 20% VAT)(£31.24 Exc. VAT)Earn 37 Loyalty Points

Brand:  Buzzweld

  (2 Reviews)


Buzzweld parts refinishing aerosol Kits

Suitable for everything from bumpers and towing assemblies to garden furniture. Designed to offer you lasting protection from an easy to apply aerosol solution.

Comes with market leading corrosion stabilising primer, and your choice of top coat finish.
Choose from :-
  1. PREMIUM Fxliner 2K black satin SMOOTH-  our toughest top coat aerosol
  2. PREMIUM Fxliner 2K black sating with a sandpaper TEXTURE- great for hiding marks, and adding a degree of anti-slip
  3. PREMIUM Buzzweld 1 2K GLOSS polyurethane - high build, high gloss. Our toughest gloss.
  4. Standard- Black smooth Matt Black- Chassis Guard
  5. Standard- Black Smooth Satin- Chassis In One fast cure and very durable- oem finish
  6. Standard- Black Smooth Mid Gloss- Classic Gloss- a gloss that doesn't highlight imperfections
  7. Standard- Black Smooth High Gloss- Gloss Extreme. a high gloss durable finish
  1. Remove loose rust and existing paint. use abrasives to achieve this. Read here for using the Primer in the kit
  2. Use Masking tape and dust sheets to protect all surrounding areas and equipment
  1. using a steady motion spray from side to side until the first coat of Rust Encapsulator primer has fully covered the item. Leave until touch dry (5>15 minutes typically), and apply the second coat at 90- degrease to the first in an up/ down movement. you may want to twist the nozzle 90 degrees if using a fan nozzle. Repeat the process at least once more.
  2. Leave item to cure for 1>2 hours until product has hardened (in low temperatures, or poor ventilation this time can increase considerably)
  3. As above with the Rust Encapsulator primer use the top coat finishing aerosol to apply your first coat. Allow to touch dry for 5>20 minutes depending on conditions before applying your final top coat. 
Note. Should the finish become contaminated with debris, or dust simply allow the finish to cure and lightly refinish with 240 or higher grit wet and dry. Re apply once flat and dry.
Average Rating (2 Reviews):  

Superb Product
Friday, 17 February 2017  | 

All you need to keep the nasty rust at bay easy to use and excellent finish

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Monday, 16 January 2017  | 

So i purchased this "kit" not really knowing what was involved.

Buzzweld talked me through the entire process, pointed out some glaring holes in my plan, and advised me on this kit. With the contamination killer I removed the dinitrol, and that allowed the RCP primer included to stick properley.

Still a little uneasy that i can just paint over the rust, after taking off the loose stuff, but after using the RCP, i let that cure and followed it up with two heavy coats of the Oxide-x and that meant i could use a sanding pad and make my crossmember nice and smooth ready for the top coat. That went great, and it gave me a finish like a spray shop for a fraction of the price!!! will definetly be using another kit on my rock sliders to tidy them up, but they are galv, so i am informed i will need the fluid etch for that

Was this helpful to you?  Yes  /  No

2 of 2 people found this review helpful.

Aerosol Nozzles MEGA PACK 20x

Aerosol Nozzles MEGA PACK 20x£9.99   £7.99

Full Selection of nozzles x20


Consists of 

2x Unblocker Nozzles

6x LVLP wide fan nozzles

6x medium flow fan nozzles

6x very high flow round nozzles

Angle Sander kit | General Chassis Preparation

Angle Sander kit | General Chassis Preparation£68.00   £55.00


A selection of useful abrasives complete with air tool that work on general chassis and underbody preparation

BuzzweldOpen Mon>Fri 09:30>16:30 TEL: 01454537637