Home > Kits > Tool / Prep / Abrasive Kits
A fully featured abrasive kit for sanding and preparing a range of surfaces even those difficult to reach areas.
Can be used with 50 or 75 abrasives from fine sanding, to buffing, underseal, seam seal removal and more.
Fantastic little sander, purchased to give me another option from my orbital sander. It has been great to get into the tricky corners on the body work as a strip the paint back and to get through the corrosion in the aluminium. Purchased with the budget 50mm discs, which I notice are a fraction smaller than the hook and loop adapter that holds them, but this hasn't caused any problems to date. In fact the only downside is a positive, in that I have a reason to buy a bigger compressor! The tank on my cheap Aldi compressor is far to small when using this sander in anger, compressors fault not the sander.
Was this helpful to you? Yes / No
This review has not been appraised.
2K Epoxy Armour Primer Corrosion StabilisingFrom: £13.20
Corrosion Stabilising Extremely hard Epoxy Primer.
50MM 40 Grit Hook and Loop Sanding pads x100£7.00
Aggressive sanding pads
Aluminium Oxide Roll On Discs 50MM 80 Grit x20From: £0.82
Abrasive Disc, Roll On Adaptor,50mm, P80, 20pcs
Blackit dry rustproofing underseal waxFrom: £8.80
Cost effective underbody / cavity wax designed to provide an alternative protection to wax oils, and wet waxes.
Blaze Rapid Strip for angle grinderFrom: £8.50
Efficient removal of paints and rust - lasts
Blaze Twistlock grinding and rust removalFrom: £1.05
Fast grinding of welds and rust twist lock