Shop by Brand
Shop by Price

Buzzweld DTM Direct To Metal Satin Paint

Buzzweld DTM Direct To Metal Satin Paint
  Zoom
Buzzweld DTM Direct To Metal Satin PaintBuzzweld DTM Direct To Metal Satin PaintBuzzweld DTM Direct To Metal Satin Paint
Buzzweld DTM Direct To Metal Satin PaintBuzzweld DTM Direct To Metal Satin PaintBuzzweld DTM Direct To Metal Satin Paint

DTM Thinner here 

DTM Explained

DTM Product Guide

What Is Stubby Schutz?

Our Price:  £12.10(Inc. 20% VAT)(£10.08 Exc. VAT)Earn 12 Loyalty Points
+

Brand:  Buzzweld

Buzzweld 1K Multi-ThinnerBuzzweld 1K Multi-Thinner
Angle Sander kit | General Chassis PreparationAngle Sander kit | General Chassis Preparation
FX11 De-Luxe Schultz rustproofing and chassis paint gunFX11 De-Luxe Schultz rustproofing and chassis paint gun
  (8 Reviews)

Buzzweld


Buzzweld DTM Direct To Metal Satin Paint

Buzzweld DTM is a specially formulated Glass Flake Impregnated single application (when applied neat through airless spray or similar method) high build coating based on a fast drying high solid alkyd resin.

DTM has excellent chip resistance, corrosion and seawater resistance with benefits including;-

 

  • High Adhesion. Designed for mechanically prepared surfaces.
  • Impregnated with toughened glass flake for increased hardness, abrasion, and porosity resistance.
  • Cost effective. No requirement for a primer or top coat.
  • Long lasting. Suitable for Marine, Industrial and other aggressive environments.
  • Easy to clean / maintain. low gloss/ high satin sheen.
  • HIGH SOLIDS 52%.
  • No thinner required reducing complication and increasing savings.
  • Great UV resistance.

TINTABLE

  • Tintable INCLUDING COLOUR aerosols come pre loaded ready to use. Tintable with colour tins will come with a separate tin that contains the colour. Simply add this to the tint at 10% and mix well, then use.
  • Tintable NO COLOUR you will receive a your order MINUS 10% product so that you can fit the tint in. so ordering a 1L schutz of tintable no tint you will receive a 1L schutz tin with 900ML of product in. add 100ML of tint, mix well and apply. Tint can be ordered separately here

Suitability

Compatible with most fully cured paint systems, DTM is suitable for protecting a range of prepared steel surfaces from chassis and underbody to axles, bodywork and more.

Preparation

  1. Ensure surfaces are, dry, clean and free from grease, dirt and other contamination.
  2. Remove scale and rust and prepare to a minimum ST3.
  3. Apply two coats by applying initially 100 micron wet followed by a brief dry off period then a further application of up to 200 micron.
  4. Allow to dry for approx. 3 hours before handling

Application Methods.

Aerosol > typically 4 coats.  Check film is minimum 100 microns DFT, > 180 microns for higher profile such as aggressive blasting.

Schultz tin spray- Applied neat 60> 75PSI typically

Tinned- 

  • Brush/ roller,
  • PCL 90>150 PSI. nozzle adjusted fully out
  • IM Gun > Awaiting test results
  • FX10 Underbody Gun 75 PSI, nozzle fully out.
  • Airless tip 0.38-0.53 mm, 50-65° angle and 2000-2300 psi pressure

Use tip 0.38-0.53 mm, 50-65° angle and 2000-2300 psi pressure

Properties

Semi Gloss finish

5m2 theoretical coverage

 

Pro's

Cost effective protection of steel surfaces

Variety of colours and application methods available.

Con's

Corrosion needs to be remedied prior to application.

Quantities estimate

Large 4x4 chassis (110 size) 5L or 24 cans

Winch Bumper 1L

Axle 1L

Nas Step 1L

Half Chassis/ small 4x4 2.5L

Small vehicle underbody 2.5L

Large 4x4 underbody 5L

Buzzweld DTM Direct To Metal Satin Paint

 

 

Thinning
 
Product Types
1000ml Paint Tin
Normal paint tin for brush / roller / thinning and spraying

1000ML Schutz Undercoating Tin
Stubby Schutz Tin. These tins work with our FX10 Spraygun & FX11 Spraygun. The gun screws directly on. To use a normal Schutz gun with a stubby schutz tin, you need to trim the pickup tube 75mm shorter.

5000ml Paint Tin
Normal paint tin for brush / roller / thinning and spraying

400ML Aerosol (traditional)
Traditional aerosol.

400ML Buzzweld Powercan
The Aerosol powercan uses NO THINNER. as a result the can outputs the same amount of paint as a spraygun. This means less coats, a much higher film build and time saved. HOWEVER- the cans empty themselves very quickly. Protection VS coverage. When using a powercan you need to spray from further away. This can can also be used as a textured bedliner spray (comes with two nozzles).
Average Rating (8 Reviews):  

Rating:  
DTM paint is amazing
Sunday, 24 April 2022  | 

I previously painted a friend's van in Raptor tinted. I bought the paint from another supplier and it was terrible you could still see the original colour underneath. I had to do redo the paint obviously.
Anyway after consultation with buzzweld them phoning me I decided DTM was the way forward I ordered a tub of the stuff 20 litres as I already had the raptor effect on the van I needed something to cover the rubbish paint from before.
I decided to roller the paint on and what a choice that was it went on like a dream took 3 hours to paint 3 coats onto the van. I could have got away with 2 coats but I enjoyed laying the paint on I went with 3. This paint is amazing already tinted so I literally took out what I needed into a paint tray and rollered away I would recommend this paint to anybody wishing to paint there van, car, trailer anything.
I have to say a big thank you to buzzweld for there help what could have cost me 600 to rectify due to previous poor quality paint supplied i did it for a quater of the price.
Thanks buzzweld and thanks DTM..

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Excellent service
Tuesday, 18 January 2022  | 

I haven't used my items yet but the knowledge from the staff member on helping me pick the correct paint to protect the underside of my evo was excellent. The items came 2 days after I ordered them.
Looking forward too using them soon.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Excellent
Sunday, 27 June 2021  | 

What can i say, we use this product for all of our project and customer cars. It covers great, is long lasting and leaves a factory look finish

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Great value
Friday, 29 January 2021  | 

Haven't yet used, but item arrived well packaged.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
delivery only
Monday, 25 January 2021  | 

Unfortunately, can only comment that helpfulness and delivery were excellent, but due to the fact the paint is for outside use and inclement weather have not opened box yet
Cheers

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Direct to Metal DTM
Sunday, 11 October 2020  | 

I purchased 1 litre of DTM as a trial. Highly impressed by the covering power but will have to wait and see how effective at protecting the chassis of my SWB Defender. Poor weather (working outdoors) will stop any more paint application until better weather next spring but wil purchase more DTM at that point. A friend has used the black DTM on his Defender chassis with very good results.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
Very black!
Thursday, 20 August 2020  | 

I bought a tin of this to splodge on with a brush, on brackets that will be hidden from view so appearance wasn't too important. It's thick and covers very well, and seems hard wearing so far.

Was this helpful to you?  Yes  /  No

This review has not been appraised.


Rating:  
DTM
Saturday, 11 August 2018  | 

Slick service,only time will tell on the longevity of the product

Was this helpful to you?  Yes  /  No

This review has not been appraised.

SALE
Buzzweld 1K Multi-Thinner

Buzzweld 1K Multi-ThinnerFrom:  £12.49

  (11)

Thinner for ALL Buzzweld 1K Products

SALE
Angle Sander kit | General Chassis Preparation

Angle Sander kit | General Chassis Preparation£84.70

  (11)

A selection of useful abrasives complete with air tool that work on general chassis and underbody preparation

Heavy Duty Underbody Spray Gun PCL

Heavy Duty Underbody Spray Gun PCL£69.45   £50.00

  (6)

Variable nozzle, output, heavy Duty, and comes with a large bore 900MM lance for cavity.

FX11 De-Luxe Schultz rustproofing and chassis paint gun

FX11 De-Luxe Schultz rustproofing and chassis paint gunFrom:  £29.00

  (7)

High quality 360 degree adjustable gun with spare top

SALE
FX10 De-Luxe Schutz Underbody Coating Gun Variable texture

FX10 De-Luxe Schutz Underbody Coating Gun Variable textureFrom:  £20.00

  (3)

External and Internal Budget application gun with spare Schultz can

Rust Primer Rust Converter

Rust Primer Rust ConverterFrom:  £20.00

  (3)

Rust Converter- Cost effective product for dealing with rust!

SALE
UP Underbody Preservation Chassis Care Ceramic

UP Underbody Preservation Chassis Care CeramicFrom:  £4.00

  (2)

Buzzweld U.P. is a ceramic, extremely easy to use, tough underbody care coating

SALE
Blackit dry rustproofing underseal wax

Blackit dry rustproofing underseal waxFrom:  £8.00

  (11)

Cost effective underbody / cavity wax designed to provide an alternative protection to wax oils, and wet waxes.

 


BuzzweldOpen Mon>Fri 09:30>16:30 TEL: 01454537637