Home > Chassis Coating > Hard Paints
Zinc Rich Primer Explained
Zinc Rich Primer Testing Update
Molten ZInc is our Cold Galvanising Solution.
Save up to 10% more by ordering in quantities of 2, 6, 12, 48
(Details shown apply to the default selection)
Very high zinc content primer, with a Specific gravity of nearly 2.5KG per liter!.
Cold Galvanising "Molten Zinc" is a high quality, durable high adhesion primer for protecting prepared steel, and repairing galvanised coatings, and zinc rich Epoxy primers.
The first time I used this I applied a bit too much to a few areas I was welding. However after some advice from Craig on how much I should look to use prior to welding it's worked perfectly. One thick-ish coat before welding and jobs a good 'un. Thanks again 🙂
Was this helpful to you? Yes / No
This review has not been appraised.
If you put this on with a few coats it will affect weldability, but one or two decent coats and you get zero burn back, and no interference with the weld. at 90% zinc its now our go to weld through primer.
Classic Chassis Gloss OEM mid gloss sheen SeriesFrom: £9.99
Glass impregnated gloss black for tough finishing or underbody components such as chassis and suspension.
Galvanised Chassis Paint Galv In One GIOFrom: £12.00
GIO, Direct to new galv.
Rust PrimerFrom: £15.00
Rust Converter- Cost effective product for dealing with rust!