Lanoguard Customer Quote:
"The best rust proofing and long term anti seize products I have tried, used the spray and grease on a 4x4 chassis and body, easy to apply and as advertised DOES NOT WASH OFF with road spray or normal pressure washing, even when I tested with a commercial jet wash at point blank. It will displace the coating at point blank if you hold it in one place but there is still enough of the coating left to repel water and protect the surface. Definitely out performs Waxoyl and Dinitroll hands down and is a lot safer to use when spraying. Very happy with the level of protection my truck now has. ,
The service from this company is fantastic as well, thank you."
Our Lanoguard Moto Spray is designed for the whole and very easy (low or no prep) covering of the underbody and chassis of vehicles and plant as a complete translucent corrosion prevention barrier to weather, salt, acid, alkaline and water.
Moto spray is designed for the easy and ultimate protection of all chassis’ including:
- 4 x 4 and Off road vehicles - Landrover Defender and Discovery, Toyota Landcruiser
- Classic cars - Triumph Spitfire, TR4 , TR6 , Rolls Royce 20/25 , Jaguar e type, Aston Martin, Bentley etc..
- Quad bikes and Trikes
- Lorries and trucks
- Fire Engines
- Caravans and trailers
Better than products you have tried before, Lanoguard Moto Spray and can be used wherever petroleum alternatives are used but will provide you with many benefits over the product you use currently and can be used to do more jobs than these too.
Something which really makes our product stand alone when compared to others is that it will stay in place doing its job for a long time and won’t be displaced by pressure washing and won’t evaporate up to 450°C or be dissolved by petrol products. As well as this it is ecologically friendly and lasts much, much longer. It will not perish any rubbers or plastics either and in fact will nourish them, and that means you don't need to mask the rubber!
Lanoguard's Moto range has been specifically developed to prevent the problems that all vehicle enthusiast encounter. Long lasting, waterproofing, anti-corrosive sprays, greases and lubricants for use on all on all types of motorbikes. Moto Spray on and the Moto Grease applications examples are:
- Seized nuts and bolts
- Chassis and suspension
- Electrics and electrolysis prevention
- For classic bikes all over preservation to keep them "as is"
- Headstock bearings, rose couplings, ball joints and flexible joints
- Trailer bodies and chassis'
Here are just a few applications that our customers are using Lanoguard Moto for:
Electrical Issues - Because Lanoguard Moto displaces water and is non-conductive you can spray it on your electrics to put an end to constant electrical problems.
Flexible Joint Protection - Petroleum based greases and sprays get washed away when you jet wash your vehicle and then the water can sit in the joints and suspension. Lanoguard Moto is jet wash resistant, heat resistant to 450°C and does not evaporate so it will protect your vehicle, flexible joints and suspension even when you jet wash.