ProXL - UtraEtch Epoxy Resin Primer - Grey - 1L

ProXL - UtraEtch Epoxy Resin Primer - Grey - 1L

An outstanding all-purpose epoxy etch primer that provides excellent adhesion and corrosion prevention on sheet steel, zinc-coated steel, aluminium and anodised aluminium. It is very fast drying with excellent flow out and can be used wet-on-wet with a super smooth finish.

ProXL - UtraEtch Epoxy Resin Primer - Grey - 1L is an outstanding all-purpose epoxy etch primer that provides excellent adhesion and corrosion prevention on sheet steel, zinc-coated steel, aluminium and anodised aluminium. It is very fast drying with excellent flow out and can be used wet-on-wet with a super smooth finish.

Ultraetch suitable substrates

• Aluminium
• Bare steel
• Fibreglass
• Galvanised steel
• Old paint work
• Zinc coated steel 

Ultraetch Application guide

1. Remove all rust from metal surfaces
2. Clean surface with ProCleaner, then sand
3. Carry out test spray
4. Areas to be sprayed must be free of grease, dust and dry
5. For professional use only
6. Wear an appropriate respirator