STANDARD W.A.R. WAR 6000ml Chassis Black Kit

This kit will treat the full chassis INSIDE AND OUT on even a large 4x4. a truly UNIVERSAL kit that wont wash off like a wet wax, or take on dirt and debris making it a nightmare to work on.

W.A.R.

Buzzweld's wheel arch refinement has been designed, tweaked, tested, and changed on a near constant basis to satisfy what we see as a big gap in the market.

This Kit contains

• 6x1000ML tins of W.A.R. advanced underbody Schultz wax, and the gun to apply it both internally and externally. This kit is enough for almost all 4x4 chassis.
• 1x Schutz Gun

W.A.R. is a tough, touch dry, impact and abrasive resistant underbody coating. W.A.R has a number of unique or premium features that ensure it will outlast a wet wax, and even many coatings, all the while being incredibly simple and convenient to apply and use.

FEATURES

• ​Tough black wax with superb coverge
• Wets out correctly, expelling moisture, and air from existing corrosion halting degradation.
• Direct to rust treatment
• Stabilises existing rust with Premium compounds for maximum longevity
• Self heals
• Resists damage
• Will not absorb road dirt, and salts
• Highly resistant to pressure washing, road spray, and general automotive use.
• Resistant to many chemicals in reasonable concentrations
• Will adhere to almost any surface with minimal preperation including Galv, aluminium, stainless, plastics, rubber (for best adhesion you should degrease, and key the surface)
• Remains Highly flexible even at lower temperatures
• Low viscosity on initial application deeply penetrates rust, and 
• Su[perb as a cavity wax
• Highly resistant to failure from contamination

Options

1. Fx11 gun is a better gun than the standard metal gun we include. see here for more information.
2. Multi-Thinner allows you to thin down one of the tins by simply topping it up, and shaking. This allows you to inject the wax into the cavities.

Applications

• Vehicle chassis and frame
• Wheel arches, and hard to reach areas
• Suspension components including leaf and coil springs
• Penetrating and sealing spot welded sections such as inner arch struts that harbour moisture between spot welds
• Door cavities and internal panel areas
• Bulkhead cavities, and unfinished areas behind binnacles
• To prevent galvanic corrosion
• body mounts and areas that you are not able to fully disasemble

Full compatibility with our cavity lance.

W.A.R. Full Product Guide here

When ordering 1,6 & 12 quantities of W.A.R. with a lance we include 1 lance in any of these packs as that is sufficient to apply. To clear the lance after use invert the can and press lance nozzle for a few seconds until clear.

Choose A Colour