Home > Chassis & Underbody Coatings > Cavity Wax and Paint
What Is Stubby Schutz?
(Details shown apply to the default selection)
Buzzweld U.P. Underbody preservation is a borosilicate glass re-enforced underbody clear lacquer with exceptional anti-corrosive properties..
See our FAQ at the bottom to help you choose how much / which UP products you require.
U.P. is specifically formulated to be applied to a wet surface that has had minimal preparation. U.P. will offer short to medium term protection above that of oils, and other waxes at low preparation levels.
We estimate the lifespan of U.P. conservatively to be between 12 and 36 months to first maintenance. This is based on the level of prep you do, and more importantly the existing condition.
Minimum prep requirements for U.P. is to wash down the vehicle underbody, and apply. You can apply U.P. whilst the vehicle is still wet.
Recommendations to improve U.P. longevity.
1x 1L Schultz Tin. Can be applied by brush, spraying is recommended.
Aerosol version still in testing.
We recommend the FX11 Schultz gun for U.P. as it atomises better, and has much better access than a standard schultz gun. Also works with PCL, and IM gun. IM Gun offers the most control and access.
UP Underbody Preservation Chassis Care Ceramic
Clear exterior and internal wax treatment.
True Corrosion Inhibitor
Superb capillary action /creep
Remains translucent to inspect substrate
Recommended application is spray due to low viscosity.
Zero Prep Underbody Preservation Clearcoat
Definitely recommend grabbing a can of this when doing any work to your vehicles underbody. Here at Rusty Customs, I use this in every single job I do. Inner sills, chassis rails, subframes, crossmembers… you name it!
Was this helpful to you? Yes / No
This review has not been appraised.
Bought 4 aerosol of cavity wax for chassis on a Hilux. Remains tacky but could well be the temp at moment. Good coverage. Cavity nozel coiled in cap was difficult to straighten so had to tape some wire on. Could be worth sending them uncoiled.
Used this in my door skins. Great stuff
After cleaning the inside rails of my 90, I carried full waxing in about 20 mins. So for about £30 and 20 mins work it’s about brained.
I used this with the PCL gun inside my Triumph Spitfire chassis. Exceptionally easy to use and you know you're getting good coverage with it because it's quite thin and will run into all the seams. I've found it handy for applying to things like bolts and adjustment shims while assembling the running gear as well for an added layer of protection from oxidization. It does dry to the touch too which is reassuring because that means it's got more chance of staying put. I love the stuff.
1 of 1 people found this review helpful.
Genuinely awesome product that with the lance coats so well. We have used it as a garage in chassis, subframes, door skins. And the coverage is wicked. Once dry it is a really adhesive product that will not just run out. Well worth using on every job
Purchased as a 1000ml shulzt can, I have used this inside a new galv chassis and bulk head on my Land Rover rebuild. Sooo good is the creep into the seams of this product is that having treat the bulkhead upside down it is still creeping out of the air vent seams since I have turned it back up the right way... it was treated a month ago! Really easy to apply, especially once warmed and using the FX11 gun. Will be using in the door frames too once they are repaired.
Impressed with how easy this is to apply and how well it penetrates into seams but would be useful if it was available in a smaller quantity than 2.5 litresUsual good service from Buzzweld with delivery next day
Hi Alan. Thanks for the feedback. We supply Zero prep in Aerosol, 1000ML schultz tins (that can be decanted to other guns if necessary), 2.5L tins, and 20L drums. Hope this helps. Thanks.
Used PCI gun to apply, used in cavities and above, around fuel tank, and on and around subframes application was pretty straight forward. Purchase 2.5 litre tins, even using a funnel to fill gun pot managed to spill as the tin does not pour vey well, would be better in bottle or tub with screen top. Used 2.5 lt doing a single good coat on an RX7.
I have used the zero prep on the bottom of both the doors on my 2004 Defender. I took the zero prep literally and sprayed it directly onto the rusted areas, applying several coats. It now appears to be much more soild and I no longer see a small pile of rust when I close the door. Fingers crossed it has done the trick.
Read all 11 customer reviews...
2K Epoxy Armour Primer, Corrosion, Rust StabilisingFrom: £14.00
Corrosion Stabilising Extremely hard Epoxy Primer.
Cavity Paint Rust Stabilising SolutionFrom: £15.00
The most permanent Cavity treatment available.
Chassis Paint Black Satin CIO Chassis In OneFrom: £10.00
Direct to rust Chassis Paint leaving a superb tough satin finish. Does almost everything!
Heavy Duty Underbody Spray Gun PCL£69.45 £50.00
Variable nozzle, output, heavy Duty, and comes with a large bore 900MM lance for cavity.
All orders are sent to be delivered to you or a neighbour. By Ordering you are accepting responsibility for the delivery location. If this is not acceptable then you MUST leave a note on your order specifying signature only. We do not ship all orders for signature as most people are not available all day to take delivery.We send all orders with DHL.
Cut off time for same day dispatch is 12pm.
If you need assistance with your delivery please call 01454537637. Our staff will be more than happy to help.
We offer a 30 day money back return policy on all goods returned in un-used condition and original packaging. Unfortunately we can not offer refunds or exchange on mixed colours or aerosols to order.
All items must be returned to qualify for a refund. Upon receipt of your item we will check the item and notify you if we are able to process a refund by phone or email within 3 working days.
Once we have despatched your goods (or if you have collected them), you can return them for a full refund (including standard delivery charges) within 30 days of delivery (or collection) without giving a reason, as long as they are with their original packaging and unused. You will be responsible for returning the goods to us (and have to pay any costs involved) and we are allowed to reduce your refund if there is any damage to the goods caused by you handling them. We will make all refunds to the credit card, debit card or PayPal account used to place your order and we will pay you within 14 days of us receiving the goods you have sent them back to us.
We will make your colour to specification, however, when added to different products the colours will be represented differently. As an example Ral3020 in Raptor, 2K Direct Gloss, Basecoat, and GIO side by side will all be DIFFERENT, even though they are made with EXACTLY the same tint. Variance issues are non refundable. Please call us if you have any concerns. We do also try and filter out these issues by inspecting your order. Metallic colours are strongly affected