Recently Viewed

Rust Encapsulator 2500ML

Rust Encapsulator 2500ML
Our Price:  £49.99(Inc. 20% VAT)(£41.66 Exc. VAT)Earn 49 Loyalty Points

Chemical Type:  Single Pack
Finish:  Satin
Primer Required:  NO
Glass Flake:  YES
Product Type:  Primer
Cure Time:  FAST
UV Resistant:  YES
Volume:  2500ML
Vapour Corrosion Inhibition:  NO
Corrosion Modification:  YES
Corrosion stabilisaton:  YES
Application Method:  Brush, Roller, Spray
Life expectancy:  >20 YEARS



No stock, delayed despatch

Heavy Duty Underbody Spray Gun PCLHeavy Duty Underbody Spray Gun PCL
Chassis Black Satin CIO Chassis In OneChassis Black Satin CIO Chassis In One
  (2 Reviews)

Buzzweld's Rust encapsulator combats corrosion, and its ability to return by tackling the causes of corrosion in several ways.

  • By stabilising corrosion from Fe203 (rust), to magnetite we remove the reactivity of not only the corrosion itself, but we reduce it BELOW that of bare steel. This means even if you removed our coating, the stabilised corrosion will degrade at a REDUCED rate vs bare steel. By doing this we reduce the ability of the part you are protecting to degrade further.


  • Rust Encapsulator is infused with Glass Flake. Upon application the flake will spread throughout the coating, prior to setting. What you are left with is a coating with evenly spaced toughened glass particles. These not only massively increase abrasive resistance and hardness, but they also create a convoluted path through the coating that moisture, and contaminents will have to travel to re activate the corrosion, add to that the corrosion will have been stabilised by the above, and you now have three layers of protection from a single coating.


  • Rust Encapsulator does not suffer from porousity, so you can protect without the requirement to then protect the primer saving money.


  • Minimal Prep. Remove loose rust/ paint, degrease and apply.


  • Rust Encapsulator is compatible with most top coats.


  • High adhesion, semi self-etching can be used under and over body fillers, under lacquer, enamels, urethanes, most fast cure coatings.

  • High build so will fill in small preparation and substrate defects.


  • Will not fail due to UV degredation


  • ZERO rust creep product. One of the fastest ways for corrosion to beat oxides, zinc, and otehr coatings is to blister and force the coating off. Rust Encapsulator is specifically designed to stop this, which means not only are you protected, but if perforation does occur, the damage is localised and limited from spreading.


  • VERY fast cure. touch dry in as little as 15 minutes.


  • Always apply minimum two coats.

This is an example of a product tab.

These are optional but provide a means of displaying more content and using less space on the page.

Average Rating (2 Reviews):  
Write a Review and share your opinions!

Top quality undercoat.
Tuesday, 26 September 2017  | 

I applied this with a brush and roller after a thorough clean down with a pressure washer then scothbrite pads and FX degreaser then pressure wash again. It went off fairly quickly so you can get on without having to hang around too much between coats and the finish was nice and flat ready for the top coat.

Was this helpful to you?  Yes  /  No

1 of 1 people found this review helpful.

Friday, 13 January 2017  | 

Brilliant paint really good value for money.
Great communication and advice !!
Cheers Craig will be using buzzweld products alot more .

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Customers who bought this item also bought:

Related Products
Heavy Duty Underbody Spray Gun PCL

Heavy Duty Underbody Spray Gun PCL£39.99  -  £42.49


Variable nozzle, output, heavy Duty, and comes with a large bore 900MM lance for cavity.

Buzzweld Zero Prep CLEAR coat cavity wax internal / external

Buzzweld Zero Prep CLEAR coat cavity wax internal / external£39.99

Transparent, Tough, VCI based cavity wax for 100% cavity protection and a touch dry finish.

RAPTOR: Durable Bed Liner + Protective Coating BLACK

RAPTOR: Durable Bed Liner + Protective Coating BLACK£23.99  -  £69.99


Also available with a range of primers for specific purposes

RAPTOR: Durable Bed Liner + Protective Coating TINTABLE

RAPTOR: Durable Bed Liner + Protective Coating TINTABLE£23.99  -  £69.99

Fluid Etch Aerosol

Fluid Etch Aerosol£14.99


Aggressive textured etch primer for use with Quora colours, and CIO. For most types of metal. Can be used with 2K Armour.

Gravity Fed Spray Gun 600ml PP Cup

Gravity Fed Spray Gun 600ml PP Cup£13.99

Budget gravity Gun. Superb for refinishing and improved finish over brush/ roller

Buzzweld Automotive Protection