Buzzweld 06:30 > 14:30 mon> Fri
DTM Toughliner Satin Paint
DTM Toughliner Satin Paint
DTM Toughliner Satin Paint
DTM Toughliner Satin Paint
DTM Toughliner Satin Paint
DTM Toughliner Satin Paint

DTM Toughliner Satin Paint

£19.99
(Inc. 20% VAT)
(£16.66 Exc. VAT)
Earn 19 Loyalty Points
(12 Reviews)
Example RAL 5002 Ultra Marine Blue
+
Information

Buzzweld DTM Direct To Metal Satin Paint

Buzzweld DTM is a specially formulated Glass Flake Impregnated single application (when applied neat through airless spray or similar method) high build coating based on a fast drying high solid alkyd resin.

DTM has excellent chip resistance, corrosion and seawater resistance with benefits including;-

 

  • High Adhesion. Designed for mechanically prepared surfaces.
  • Impregnated with toughened glass flake for increased hardness, abrasion, and porosity resistance.
  • Cost effective. No requirement for a primer or top coat.
  • Long lasting. Suitable for Marine, Industrial and other aggressive environments.
  • Easy to clean / maintain. low gloss/ high satin sheen.
  • HIGH SOLIDS 52%.
  • No thinner required reducing complication and increasing savings.
  • Great UV resistance.

TINTABLE

  • Tintable INCLUDING COLOUR aerosols come pre loaded ready to use. Tintable with colour tins will come with a separate tin that contains the colour. Simply add this to the tint at 10% and mix well, then use.
  • Tintable NO COLOUR you will receive a your order MINUS 10% product so that you can fit the tint in. so ordering a 1L schutz of tintable no tint you will receive a 1L schutz tin with 900ML of product in. add 100ML of tint, mix well and apply. Tint can be ordered separately here

Suitability

Compatible with most fully cured paint systems, DTM is suitable for protecting a range of prepared steel surfaces from chassis and underbody to axles, bodywork and more.

Preparation

  1. Ensure surfaces are, dry, clean and free from grease, dirt and other contamination.
  2. Remove scale and rust and prepare to a minimum ST3.
  3. Apply two coats by applying initially 100 micron wet followed by a brief dry off period then a further application of up to 200 micron.
  4. Allow to dry for approx. 3 hours before handling
  5. If applying a thicker / textured coating ensure plenty of fresh warm air (min 15c) during the initial 24 hours of curing. otherwise solvent entrapment may occur and the cure time be disproportionatley longer than TDS

Application Methods.

Aerosol > typically 4 coats.  Check film is minimum 100 microns DFT, > 180 microns for higher profile such as aggressive blasting.

Schultz tin spray- Applied neat 60> 75PSI typically

Tinned- 

  • Brush/ roller,
  • PCL 90>150 PSI. nozzle adjusted fully out
  • IM Gun > Awaiting test results
  • FX10 Underbody Gun 75 PSI, nozzle fully out.
  • Airless tip 0.38-0.53 mm, 50-65° angle and 2000-2300 psi pressure

Use tip 0.38-0.53 mm, 50-65° angle and 2000-2300 psi pressure

Properties

Semi Gloss finish

5m2 theoretical coverage

 

Pro's

Cost effective protection of steel surfaces

Variety of colours and application methods available.

Con's

Corrosion needs to be remedied prior to application.

Needs plenty of fresh warm / dry air if applying in large areas, or heavier coats

Quantities estimate

Large 4x4 chassis (110 size) 5L or 24 cans

Winch Bumper 1L

Axle 1L

Nas Step 1L

Half Chassis/ small 4x4 2.5L

Small vehicle underbody 2.5L

Large 4x4 underbody 5L

Buzzweld DTM Direct To Metal Satin Paint

PRODUCT TYPES

  • BLACK - As it says. A standard black coloured DTM
  • TINTABLE With Tint. DTM, but provided with an additional pot of colour of your choice (almost any colour you want!). 
  • PLATINUM- The highest grade of DTM- Infused with our compound to assist with :-
  1. Sound Deadening -DTM Now limits sound transfer
  2. Resonance Suppression -DTM Now actively combats resonance produced from panels
  3. Thermal Insulative properties -DTM now significantly limits heat loss, and reduces energy required to keep a cab cool.
  4. Ceramic -DTM is now more resistant to abrasion, gouging and has increased longevity due to increased porosity resistance

By selecting the Platinum option you are purchasing the highest grade of DTM we can produce. For ultimate sound and thermal insulation we recommend applying DTM over Cosyfoam.

 

Thinning
 
Product Types
1000ml Paint Tin
Normal paint tin for brush / roller / thinning and spraying

1000ML Schutz Undercoating Tin
Stubby Schutz Tin. These tins work with our FX10 Spraygun & FX11 Spraygun. The gun screws directly on. To use a normal Schutz gun with a stubby schutz tin, you need to trim the pickup tube 75mm shorter.

5000ml Paint Tin
Normal paint tin for brush / roller / thinning and spraying

400ML Aerosol (traditional)
Traditional aerosol.

400ML Buzzweld Powercan
The Aerosol powercan uses NO THINNER. as a result the can outputs the same amount of paint as a spraygun. This means less coats, a much higher film build and time saved. HOWEVER- the cans empty themselves very quickly. Protection VS coverage. When using a powercan you need to spray from further away. This can can also be used as a textured bedliner spray (comes with two nozzles).
12 Reviews:

Brilliant
Rating:
23 November 2023  | 

Used to paint a shower tray we have built for our camper conversion, such an amazing paint, just watch out for the solvent fumes!

 
Was this helpful to you?  Yes  /  No

Great help and great product
Rating:
14 September 2023  | 

Emailed Buzzweld for advice on my specific use-case and this was one of the products they recommended for the job. I bought the aerosol version and probably the nicest spray paint I've ever used, it goes on superb, good coverage, the finish is excellent and the satin sheen is spot on. Will be ordering plenty more

1 of 1 people found this review helpful.
Was this helpful to you?  Yes  /  No

Amazing product but most importantly the advice given from the team is second to none.
Rating:
06 April 2023  | 

The guys at Buzzweld really know their stuff. I was in need of lots of advice regarding the refurbishment of my 15ft shipping container catering trailer and they couldn't have been more helpful. I wanted to the DTM to be colour matched to another company vehicle which had been wrapped recently. I posted a sample down to be matched which was spot on. The unit now looks like new, I couldn't be happier with the result.

Amazing products but most importantly the advice given is second to none.

We will be back

 
Was this helpful to you?  Yes  /  No

DTM AEROSOL IN SATIN BRONZE GREEN
Rating:
12 November 2022  | 

Was looking for a solution to paint some radio equipment which has mixed metal type casings and was currently partly painted with plenty of chips and nocks to with some rust on the steel parts. After removing rust and a light scuff to the rest i could spray this paint over it all.
After a really! good shake the paint came out in a very nice spray from the can and high build too which covered the surfaces in 1 to 2 coats leaving a good thick build which coved the old paints scrapes and knocks very well. Overall an excellent product very happy.

 
Was this helpful to you?  Yes  /  No

DTM paint is amazing
Rating:
24 April 2022  | 

I previously painted a friend's van in Raptor tinted. I bought the paint from another supplier and it was terrible you could still see the original colour underneath. I had to do redo the paint obviously.
Anyway after consultation with buzzweld them phoning me I decided DTM was the way forward I ordered a tub of the stuff 20 litres as I already had the raptor effect on the van I needed something to cover the rubbish paint from before.
I decided to roller the paint on and what a choice that was it went on like a dream took 3 hours to paint 3 coats onto the van. I could have got away with 2 coats but I enjoyed laying the paint on I went with 3. This paint is amazing already tinted so I literally took out what I needed into a paint tray and rollered away I would recommend this paint to anybody wishing to paint there van, car, trailer anything.
I have to say a big thank you to buzzweld for there help what could have cost me £600 to rectify due to previous poor quality paint supplied i did it for a quater of the price.
Thanks buzzweld and thanks DTM..

3 of 3 people found this review helpful.
Was this helpful to you?  Yes  /  No

Excellent service
Rating:
18 January 2022  | 

I haven't used my items yet but the knowledge from the staff member on helping me pick the correct paint to protect the underside of my evo was excellent. The items came 2 days after I ordered them.
Looking forward too using them soon.

 
Was this helpful to you?  Yes  /  No

Excellent
Rating:
27 June 2021  | 

What can i say, we use this product for all of our project and customer cars. It covers great, is long lasting and leaves a factory look finish

1 of 1 people found this review helpful.
Was this helpful to you?  Yes  /  No

Great value
Rating:
29 January 2021  | 

Haven't yet used, but item arrived well packaged.

 
Was this helpful to you?  Yes  /  No

delivery only
Rating:
25 January 2021  | 

Unfortunately, can only comment that helpfulness and delivery were excellent, but due to the fact the paint is for outside use and inclement weather have not opened box yet
Cheers

 
Was this helpful to you?  Yes  /  No

Direct to Metal DTM
Rating:
11 October 2020  | 

I purchased 1 litre of DTM as a trial. Highly impressed by the covering power but will have to wait and see how effective at protecting the chassis of my SWB Defender. Poor weather (working outdoors) will stop any more paint application until better weather next spring but wil purchase more DTM at that point. A friend has used the black DTM on his Defender chassis with very good results.

1 of 1 people found this review helpful.
Was this helpful to you?  Yes  /  No

Read all 12 customer reviews...

Related Products

Buzzweld 1K Multi-Thinner
£12.49
(14)

Thinner for ALL Buzzweld 1K Products

SALE
Angle Sander kit | General Chassis Preparation
Angle Sander kit | General Chassis Preparation
£84.70
(11)

A selection of useful abrasives complete with air tool that work on general chassis and underbody preparation

FX11 De-Luxe Schultz rustproofing and chassis paint gun
From  £29.00
(7)

High quality 360 degree adjustable gun with spare top

SALE
FX10 De-Luxe Schutz Underbody Coating Gun Variable texture
FX10 De-Luxe Schutz Underbody Coating Gun Variable texture
From  £20.00
(3)

External and Internal Budget application gun with spare Schultz can

Zero Prep Underbody Preservation Chassis Care Ceramic
From  £4.00
(10)

Buzzweld U.P. is a ceramic, extremely easy to use, tough underbody care coating

Blackit dry rustproofing underseal wax
£9.99
(11)

Cost effective underbody / cavity wax designed to provide an alternative protection to wax oils, and wet waxes.

Raptor Bed Liner in UP / USA Colours
Raptor Bed Liner in UP / USA Colours
From  £40.00
(1)

The toughest UPOL Raptor in the world. By Buzzweld.

Raptor Bed Liner
Raptor Bed Liner
From  £16.00
(21)

Raptor in ANY COLOUR, Get it here.

IMPORTANT TERMS. Read before ordering.

Delivery & returns
DELIVERY

All orders are sent to be delivered to you or a neighbour. By Ordering you are accepting responsibility for the delivery location. If this is not acceptable then you MUST leave a note on your order specifying signature only. We do not ship all orders for signature as most people are not available all day to take delivery.We send all orders with DHL.

Cut off time for same day dispatch is 12pm.

Please supply a mobile number to assist the courier.
DHL will attempt delivery twice, after this you may be charged an addition fee.
All orders will only be sent if the billing address matches the card details.
Please ensure someone is available to receive the delivery.
We can not be held responsible for any delays caused by DHL.
If you need assistance with your delivery please call 01454315588. Our staff will be more than happy to help.


RETURNS

We offer a 30 day money back return policy on all goods returned in un-used condition and original packaging. Unfortunately we can not offer refunds or exchange on mixed colours or aerosols to order.

All items must be returned to qualify for a refund. Upon receipt of your item we will check the item and notify you if we are able to process a refund by phone or email within 3 working days.

Once we have despatched your goods (or if you have collected them), you can return them for a full refund (including standard delivery charges) within 30 days of delivery (or collection) without giving a reason, as long as they are with their original packaging and unused. You will be responsible for returning the goods to us (and have to pay any costs involved) and we are allowed to reduce your refund if there is any damage to the goods caused by you handling them. We will make all refunds to the credit card, debit card or PayPal account used to place your order and we will pay you within 14 days of us receiving the goods you have sent them back to us.


Colours

We will make your colour to specification, however, when added to different products the colours will be represented differently. As an example Ral3020 in Raptor, 2K Direct Gloss, Basecoat, and GIO side by side will all be DIFFERENT, even though they are made with EXACTLY the same tint. Variance issues are non refundable. Please call us if you have any concerns. We do also try and filter out these issues by inspecting your order. Metallic colours are strongly affected

Cancellations

All cancellations must be provided as soon as possible via phone contact only. We cannot always view emails / messages in a timely manner. Your order can be cancelled on 01454315588 mon>fri 06:30>14:30.  Custom orders such as non stock items, and colours are made to order. If you wish to cancel an order that has a custom item on it, and we have already made it, We will not be able to refund for that item because we cannot return it to "stock".

Brand
Buzzweld