Large Car (monococque) Rustproofing / Undersealing
Please call 01454537637 to book
Platinum Premium UP Black UP Clear
Platinum Underbody Rustproofing treatment
- Remove arch liners
- Remove under trays
- Remove exhaust
- Remove heat shields
- Steam clean underbody
- Heat and clean cavities with 155C steam
- Needle gun and sand the underbody/ suspension
- Stripe coat Underbody
- Cavity paint cavities
- Black UP Cavities
- Primer underbody (re or 2K Armour)
- Top coat underbody (WAR)
- 1 year full inspection, secondary stage, and cavity topup included
Premium Underbody Rustproofing Treatment
- Remove under trays
- Steam clean underbody
- Needle gun and sand the underbody/ suspension
- Stripe coat Underbody (RE)
- Black UP Cavities
- Blackit
- 1 year inspection included.
UP Underbody Preservation Black
Same Day Black anti-corrosive treatment that dries properley, creates an easy to maintain surface that has self cleaning abilities.
We treat the entire underside of your vehicle, including subframes, axles / suspension, and underbody such as sills up to the jacking seam, in almost all cases including wheel arches.
U.P. has significant time and cost benefits over waxes and paints as it can be completed same day.
U.P. is specifically formulated to be applied to a wet surface that has had minimal preparation. U.P. will offer great protection above that of oils, and other waxes at low preparation levels.
Benefits include
- U.P. does not hide existing issues. You can spot problems as they occur and maintain accordingly.
- Greatly improves aesthetics, for minimal cost
- PREVENTS road salts and dirt sticking to the underside.
- LOW reactivity. U.P. is compatible with most existing paints and treatments making it ideal as a Patina Preserver, and a topup protection system.
- EXTREME creep from absorption, as well as capillary action.
- U.P. flows in between spot welds, and absorbs into corrosion forcing out the residual moisture and air, suffocating the ability for corrosion to continue.
- FAST CURE. U.P. can be touch dry in as little as 30 minutes.
- High temperature tolerance. Survives on the exhaust system up to but not including the downpipe.
- Forces out moisture from wiring looms, and electrical connectors.
- Presents an easy to clean surface.
- Vehicle underbody stays dryer for longer, and holds less water in adverse conditions.
- Hydrophobic- water beads off.
- Dries properly, does not wash away, or attract dirt/ debris
- Makes maintenance work ALOT easier- cleaner, drier, less rust.
- EASY to weld, or prepare an area that has been treated.
We estimate the lifespan of U.P. conservatively to be between 12 and 36 months to first maintenance. This will vary based on the existing condition, and useage.
Typical Process.
- Steam clean and inspect underbody
- Steam cleaning @155C of underbody
- Air jetting down to remove excess moisture
- Sheet off body to protect from overspray
- Application of UP to underbody and cavities and arches (where accessible.
UP Underbody Preservation Clear
Same Day Clear anti-corrosive treatment that dries properley, creates an easy to maintain surface that has self cleaning abilities.
We treat the entire underside of your vehicle, including subframes, axles / suspension, and underbody such as sills up to the jacking seam, in almost all cases including wheel arches.
U.P. has significant time and cost benefits over waxes and paints as it can be completed same day.
U.P. is specifically formulated to be applied to a wet surface that has had minimal preparation. U.P. will offer great protection above that of oils, and other waxes at low preparation levels.
Benefits include
- Clear- U.P. does not hide existing issues. You can spot problems as they occur and maintain accordingly.
- PREVENTS road salts and dirt sticking to the underside.
- LOW reactivity. U.P. is compatible with most existing paints and treatments making it ideal as a Patina Preserver, and a topup protection system.
- EXTREME creep from absorption, as well as capillary action.
- U.P. flows in between spot welds, and absorbs into corrosion forcing out the residual moisture and air, suffocating the ability for corrosion to continue.
- FAST CURE. U.P. can be touch dry in as little as 30 minutes.
- High temperature tolerance. Survives on the exhaust system up to but not including the downpipe.
- Forces out moisture from wiring looms, and electrical connectors.
- Presents an easy to clean surface.
- Vehicle underbody stays dryer for longer, and holds less water in adverse conditions.
- Hydrophobic- water beads off.
- Dries properly, does not wash away, or attract dirt/ debris
- Makes maintenance work ALOT easier- cleaner, drier, less rust.
- EASY to weld, or prepare an area that has been treated.
We estimate the lifespan of U.P. conservatively to be between 12 and 36 months to first maintenance. This will vary based on the existing condition, and useage.
Typical Process.
- Steam clean and inspect underbody
- Steam cleaning @155C of underbody
- Air jetting down to remove excess moisture
- Sheet off body to protect from overspray
- Application of UP to underbody and cavities and arches (where accessible.
IMPORTANT TERMS. Read before ordering.
Delivery & returns
DELIVERY
All orders are sent to be delivered to you or a neighbour. By Ordering you are accepting responsibility for the delivery location. If this is not acceptable then you MUST leave a note on your order specifying signature only. We do not ship all orders for signature as most people are not available all day to take delivery.We send all orders with DHL.
Cut off time for same day dispatch is 12pm.
Please supply a mobile number to assist the courier.
DHL will attempt delivery twice, after this you may be charged an addition fee.
All orders will only be sent if the billing address matches the card details.
Please ensure someone is available to receive the delivery.
We can not be held responsible for any delays caused by DHL.
If you need assistance with your delivery please call 01454315588. Our staff will be more than happy to help.
RETURNS
We offer a 30 day money back return policy on all goods returned in un-used condition and original packaging. Unfortunately we can not offer refunds or exchange on mixed colours or aerosols to order.
All items must be returned to qualify for a refund. Upon receipt of your item we will check the item and notify you if we are able to process a refund by phone or email within 3 working days.
Once we have despatched your goods (or if you have collected them), you can return them for a full refund (including standard delivery charges) within 30 days of delivery (or collection) without giving a reason, as long as they are with their original packaging and unused. You will be responsible for returning the goods to us (and have to pay any costs involved) and we are allowed to reduce your refund if there is any damage to the goods caused by you handling them. We will make all refunds to the credit card, debit card or PayPal account used to place your order and we will pay you within 14 days of us receiving the goods you have sent them back to us.
Colours
We will make your colour to specification, however, when added to different products the colours will be represented differently. As an example Ral3020 in Raptor, 2K Direct Gloss, Basecoat, and GIO side by side will all be DIFFERENT, even though they are made with EXACTLY the same tint. Variance issues are non refundable. Please call us if you have any concerns. We do also try and filter out these issues by inspecting your order. Metallic colours are strongly affected
Cancellations
All cancellations must be provided as soon as possible via phone contact only. We cannot always view emails / messages in a timely manner. Your order can be cancelled on 01454315588 mon>fri 06:30>14:30. Custom orders such as non stock items, and colours are made to order. If you wish to cancel an order that has a custom item on it, and we have already made it, We will not be able to refund for that item because we cannot return it to "stock".
