Passivate Protection Passive8 weld through 500ml Aerosol

Arriving early december

Passivate Protection Passive8 weld through 500ml Aerosol

• Highly suitable for welding seams
• High quality zinc coating with more than 90% zinc share in the dry film
• Fast drying
• Resistant to heats of up to 350°c
• Resistant to petrol, chemicals and weather influences
• Resistant to petrol, chemicals and weather influences
• Cathodic corrosion protection for all bare metals providing resistance to the highest demands against corrosion.
• Apply a thin coat for weld through, a thicker coat for longevity. Can be used with our seam nozzle & Cavity Lance

Passivate Protection Passive8 weld through 500ml Aerosol Physical and chemical data 

• Product Type-      Nitro Combi.
• Coverage-             1.56 - 2.19m² per 500ml.
• Drying times-       Dust Free 5 - 10minutes, Touch Dry 10 - 20 minutes, Overcoatable after 24 hours, Resistant to heat after 8 - 12 hours
• The drying time depends on temperature, humidity and the thickness of the applied coat.

Passivate Protection Passive8 weld through 500ml Aerosol Surface Preparation

•  Before application, ensure that the mixing balls in the aerosol are moving freely as this ensures that the zinc content is being physically mixed into the paint.
• The surface must be free from all contamination including rust, grease and moisture
• Before use, carefully read and note the warning text on the label.
• When mixing unknown products or different brands always do a test patch to test for reactions.

Passivate Protection Passive8 weld through 500ml Aerosol Environmental / Disposal

• This product is 100% free of heavy metals and the caps and packaging are made of recyclable material
• Completely emptied cans should be put in recycling skips or an appropriate container.
• Cans which are not empty should be disposed off as special refuse.
• This application and technical information is given to the best of our knowledge.
• The notes mentioned herein are, however, non-binding and do not exempt you from own tests to see whether the products supplied by us are suitable for your special application.
• The use and processing is beyond our control and therefore exclusively is the responsibility of the user