Platinum Paint Package

This large kit is the typical products we use on our platinum treatments. There is some overlap, so you could do several vehicles using just this kit, or one larger one with a chassis and underbody. It includes many consumables we use, and we are on hand to advise for the best way to use this kit for maximum effect. Typically we would apply the RE, CIO and Blackit to the Chassis, followed by RE and WAR soundproofer to the underbody.

Contents

1. 8x1L WAR Schutz Tintable with sound/ thermal additive (Please specify WAR Ultra Black if you would like Black) (use as final coat on chassis)
2. Tint for 8L or WAR to your colour
3. 6x1L Blackit (use as final coat on underbody)
4. 8x1L Rust Encapsulator Schutz (primer for corrosion more exposed areas)
5. 5x 1L CIO Schutz (use as mid coat)
6. 6x Cavity Paint Aerosols
7. 2x Cavity lances for aerosols
8. FX11 Gun -Variable access schutz gun)
9. 1x WAR Aerosol (sound/ thermal / tinted to colour of kit)
10. 1x Blackit Aerosol
11. 1x Rust Encapsulator Aerosol
12. 1x CIO variable flow aerosol
13. 1x 2k Epoxy Armour Stripe coating kit (initial coat on edges- see guide in blog)
14. 1x Bodyshop roll of masking tape (general underbody masking)
15. 1x MASQ Low tack masking tape (bodywork masking)
16. 1x Dust sheet pack
17. 1x Molten Zinc Aerosol (weld through)
18. 5L Buzzweld Multi-thinner (to alter finish, clean, thin prodcuts)
19. 1x WAR Anti-seize / thread dip.
20. 1x brown p[aper roll masking paper
21. 1x A1 P2 Spraying Mask
22. 1x PIO plastics aersol in black
23. 1x scotch pack
24. 1x FXliner black smooth aerosol