Buzzweld 06:30 > 14:30 mon> Fri
2K Epoxy Armour Primer, Corrosion, Rust Stabilising
2K Epoxy Armour Primer, Corrosion, Rust Stabilising
2K Epoxy Armour Primer, Corrosion, Rust Stabilising
2K Epoxy Armour Primer, Corrosion, Rust Stabilising
2K Epoxy Armour Primer, Corrosion, Rust Stabilising

2K Epoxy Armour Primer, Corrosion, Rust Stabilising

(Exc. 20% VAT)
Saving Of
(£51.20 Inc. VAT)
Earn 42 Loyalty Points
(6 Reviews)

2K Epoxy Armour Primer, Corrosion, Rust Stabilising

  • Sound deadener
  • 77% as hard as steel!
  • Infused with toughened glass flake for increased impermeability and abrasion resistance
  • Single Coat Direct system
  • Designed for Hand prepared Steel
  • Contains a mined pigment that converts corrosion present to inert magnetite, thus preventing further corrosion. 
  • Contains self leafing glass flake that laminate within the coating to form an impermeable barrier to oxygen and moisture.
  • Cures under-water
  • High build, solvent-less two pack epoxy, tar-free, rust stabilising primer
  • Tolerant of application to damp substrates
  • Buzzweld 2K Armour provides a very high film build by brush.
  • Buzzweld 2K Armour contains rust stabilising pigment for long term anti-corrosive protection and covnersion.
  • It has a specially designed tar-free resin system that can be applied to damp steel surfaces to aid practicality under difficult various conditions. 
  • 2K Epoxy Armour Primer, Corrosion, Rust Stabilising

Recommended for.

  • Chassis and underbody protection.
  • The highest longevity of all the primers we offer beating even RCP (RCP is easier to use, faster cure, and cheaper)
  • Keyed substrates (rough to touch, steel, not for smooth paint/ steel) or t-washed glav that has a rough profile.
6 Reviews:

2K Epoxy Armour Primer, Corrosion, Rust Stabilising
06 March 2022  | 

Awesome, thanks very much indeed..

Was this helpful to you?  Yes  /  No

A piece of piss
30 October 2020  | 

This product is very easy to use ,excellent coverage

Was this helpful to you?  Yes  /  No

Rust protection
21 May 2020  | 

I have used this product before and found it very good ,it needs a lot of mixing of the 2 parts ,and it needs thining if brushing on ,dont mix more than you need, it seems to go a long way ,and covers very well , you can always mix some more, use their thinners only.
The paint is quite expensive and it sets very hard, i dont no how it will perform as a rust prevention, as i only painted the cars floors and chassis resently, time will tell.

1 of 1 people found this review helpful.
Was this helpful to you?  Yes  /  No

15 January 2017  | 

Great product. Recently painted my chassis. Good coverage nice and thick. It brushed on well but been told since it's easier to roll on. Nice finish although I did overcoat it in CIO another great product 👌

Was this helpful to you?  Yes  /  No

Superb product
15 January 2017  | 

Does exactly what was needed.
Thorough mixing and an even coat, then left to harden til the next day, this stuff is brilliant. Nothing compares. Nothing even comes close.
It's expensive, but it's well worth the money. I shall be buying more once I've used current tins.
Highly recommend to anyone wanting ultimate coating and protection.


All products
11 August 2016  | 

Buzz weld products are if not the best, second to none on the market.

I have used most of there range on works as small as a landrover part, up to a house boat we just finished building.

2k is amazing, being in the painting industry for over 20 years I can honestly say I used nothing as good...!

Rcp is amazing, coverage is fantastic and has fantastic adhesion and wetting out properties.

Cio is just the don, chassis in a can is an understatement.

You may think I'm linked to the company with these statements but I'm not, I just like to give credit where it's due.

If you don't want to compromise on quality, look no further, speak with Craig Jones and the customer service and product knowledge matches the product itself, top notch.

5 of 5 people found this review helpful.
Was this helpful to you?  Yes  /  No
How much do i need?


  • 5.6M2/1000ML
  • 5000ML for a chassis and axles up to 110 size.
  • 5.6M2/1000ML if top coating a primer with a smooth substrate
  • 4.5m2/1000ML if top coating a rough substrate with no primer
  • 500ML per average wheel arch (using two coats)
Related Products

Angle Sander kit | General Chassis Preparation
Angle Sander kit | General Chassis Preparation

A selection of useful abrasives complete with air tool that work on general chassis and underbody preparation

Paint Mixing paddle 1000>5000ML Tins
Paint Mixing paddle 1000>5000ML Tins

Paint Mixing paddle 1000>5000ML Tins

2k Multi-Thinner
2k Multi-Thinner

Thinners for 2k Armour

Paint Anti-Slip Coating additive. Bed Liner, rock sliders etc
Paint Anti-Slip Coating additive. Bed Liner, rock sliders etc

can be used with CIO, Gloss extreme, 2k armour, and raptor.

Seam Sealing Brush
Seam Sealing Brush

tough white nylon bristles, Heavy Duty,

IMPORTANT TERMS. Read before ordering.

Delivery & returns

All orders are sent to be delivered to you or a neighbour. By Ordering you are accepting responsibility for the delivery location. If this is not acceptable then you MUST leave a note on your order specifying signature only. We do not ship all orders for signature as most people are not available all day to take delivery.We send all orders with DHL.

Cut off time for same day dispatch is 12pm.

Please supply a mobile number to assist the courier.
DHL will attempt delivery twice, after this you may be charged an addition fee.
All orders will only be sent if the billing address matches the card details.
Please ensure someone is available to receive the delivery.
We can not be held responsible for any delays caused by DHL.
If you need assistance with your delivery please call 01454315588. Our staff will be more than happy to help.


We offer a 30 day money back return policy on all goods returned in un-used condition and original packaging. Unfortunately we can not offer refunds or exchange on mixed colours or aerosols to order.

All items must be returned to qualify for a refund. Upon receipt of your item we will check the item and notify you if we are able to process a refund by phone or email within 3 working days.

Once we have despatched your goods (or if you have collected them), you can return them for a full refund (including standard delivery charges) within 30 days of delivery (or collection) without giving a reason, as long as they are with their original packaging and unused. You will be responsible for returning the goods to us (and have to pay any costs involved) and we are allowed to reduce your refund if there is any damage to the goods caused by you handling them. We will make all refunds to the credit card, debit card or PayPal account used to place your order and we will pay you within 14 days of us receiving the goods you have sent them back to us.


We will make your colour to specification, however, when added to different products the colours will be represented differently. As an example Ral3020 in Raptor, 2K Direct Gloss, Basecoat, and GIO side by side will all be DIFFERENT, even though they are made with EXACTLY the same tint. Variance issues are non refundable. Please call us if you have any concerns. We do also try and filter out these issues by inspecting your order. Metallic colours are strongly affected


All cancellations must be provided as soon as possible via phone contact only. We cannot always view emails / messages in a timely manner. Your order can be cancelled on 01454315588 mon>fri 06:30>14:30.  Custom orders such as non stock items, and colours are made to order. If you wish to cancel an order that has a custom item on it, and we have already made it, We will not be able to refund for that item because we cannot return it to "stock".