Buzzweld 06:30 > 14:30 mon> Fri

Angle Sander kit | General Chassis Preparation

(Exc. 20% VAT)
(£84.70 Inc. VAT)
Earn 70 Loyalty Points
(11 Reviews)

Angle Sander kit | General Chassis Preparation

A fully featured abrasive kit for sanding and preparing a range of surfaces even those difficult to reach areas.


Kit Contains

  • Air Operated angle sander
  • 5x Norton ceramic 36 grip grinding wheels
  • 1x Norton Blaze Rapid Strip 50mm disc
  • 1x Twistlock adaptor with surface interface pad
  • 100x 40Grit sanding pads
  • 1x Norton Ceramic 50MM flap disc
  • 1x 50MM twistlock adaptor
  • 1x 75MM twistlock adaptor
  • 1x PCL air fitting


Can be used with 50 or 75 abrasives from fine sanding, to buffing, underseal, seam seal removal and more.


  • Pad Diameter 3”/75mm + 2"/50mm
  • Pad Thread Size 1/4”
  • Free Speed 16,000RPM
  • Maximum Pad Speed 20,000RPM
  • Operating Pressure 6.3BAR
  • Air Consumption 4CFM
  • Air Inlet 1/4” BSP
  • Vibration Level 3.4m/s2 Max
  • Noise Level 88aD(A) Max
  • Weight 620g
  • Length 153mm

Angle Sander kit | General Chassis Preparation

11 Reviews:

Great quality item
27 February 2022  | 

When I found this on the Buzzweld website I could tell it was going to be a decent product. I wasnít disappointed, a great sander and good quality discs, perfectly upto the job of cleaning corrosion on the underside of a defender tub. Superb value too!

Was this helpful to you?  Yes  /  No

Angle Sander
15 September 2021  | 

Brilliant bit of kit and good selection of attachments for sanding my chassis and floor pans.
Made thenwhole job much easier.

Was this helpful to you?  Yes  /  No

Great little sander
26 August 2021  | 

Bought this kit to remove rust underneath a Landrover and have not been disappointed. Surprised how powerful and good the sander is.

1 of 1 people found this review helpful.
Was this helpful to you?  Yes  /  No

Still waiting ?
07 June 2020  | 

The tool is a nice bit of kit, itís a pity I canít use it as I STILL have no sanding sheets as they were not delivered???? Chassis would have rotten away as this rate. Any ideas when I might get them ?

1 of 2 people found this review helpful.
Was this helpful to you?  Yes  /  No

Air PCL sander
21 April 2020  | 

Very pleased with this little sander so handy to get into all the tight corners of chassis rails. The blaze stripe pads are brilliant and last a long time making prep for your favourite paint as easy as possible

Was this helpful to you?  Yes  /  No

Great little tool
20 April 2020  | 

Great little tool very powerful for its size, good selection of pads to get started, well work checking out the info videos on here for guidance.

Was this helpful to you?  Yes  /  No

Great for chassis prep.
03 April 2020  | 

Used this to finish up my chassis preparation on my mx5 brilliant tool get inside all the difficult to reach bits.

Was this helpful to you?  Yes  /  No

Angle Sander Kit
31 March 2020  | 

Bought this from Craig last week, so far I am very impressed with it. Can be used for many things. It is light in weight meaning you can work for longer without feeling tired. Can get it in to areas you cant get regular battery drills in to. Only downside is watching where your air hose gets snagged while working.

Was this helpful to you?  Yes  /  No

Great Tool
07 January 2020  | 

Got this a couple of months ago and it's become my go to for cleaning and sanding prior to painting. Nice selection of pads and fittings in the box to try out and the blaze discs are great.

1 of 1 people found this review helpful.
Was this helpful to you?  Yes  /  No

blaze disk
06 January 2020  | 

the orange blaze disks work really well on anything softer like underseal and last quit long

Was this helpful to you?  Yes  /  No

Read all 11 customer reviews...

Related Products

2K Epoxy Armour Primer, Corrosion, Rust Stabilising
From  £12.67

Corrosion Stabilising Extremely hard Epoxy Primer. 

50MM 40 Grit Hook and Loop Sanding pads x100
50MM 40 Grit Hook and Loop Sanding pads x100

Aggressive sanding pads

Blackit dry rustproofing underseal wax

Cost effective underbody / cavity wax designed to provide an alternative protection to wax oils, and wet waxes.

Blaze Rapid Strip for angle grinder
Blaze Rapid Strip for angle grinder
From  £7.50

Efficient removal of paints and rust - lasts

Blaze Twistlock grinding and rust removal
Blaze Twistlock grinding and rust removal
From  £0.91

Fast grinding of welds and rust twist lock

Blaze Twistlock mini flapdisc
Blaze Twistlock mini flapdisc
From  £5.17

mini ceramic flap disc

IMPORTANT TERMS. Read before ordering.

Delivery & returns

All orders are sent to be delivered to you or a neighbour. By Ordering you are accepting responsibility for the delivery location. If this is not acceptable then you MUST leave a note on your order specifying signature only. We do not ship all orders for signature as most people are not available all day to take delivery.We send all orders with DHL.

Cut off time for same day dispatch is 12pm.

Please supply a mobile number to assist the courier.
DHL will attempt delivery twice, after this you may be charged an addition fee.
All orders will only be sent if the billing address matches the card details.
Please ensure someone is available to receive the delivery.
We can not be held responsible for any delays caused by DHL.
If you need assistance with your delivery please call 01454315588. Our staff will be more than happy to help.


We offer a 30 day money back return policy on all goods returned in un-used condition and original packaging. Unfortunately we can not offer refunds or exchange on mixed colours or aerosols to order.

All items must be returned to qualify for a refund. Upon receipt of your item we will check the item and notify you if we are able to process a refund by phone or email within 3 working days.

Once we have despatched your goods (or if you have collected them), you can return them for a full refund (including standard delivery charges) within 30 days of delivery (or collection) without giving a reason, as long as they are with their original packaging and unused. You will be responsible for returning the goods to us (and have to pay any costs involved) and we are allowed to reduce your refund if there is any damage to the goods caused by you handling them. We will make all refunds to the credit card, debit card or PayPal account used to place your order and we will pay you within 14 days of us receiving the goods you have sent them back to us.


We will make your colour to specification, however, when added to different products the colours will be represented differently. As an example Ral3020 in Raptor, 2K Direct Gloss, Basecoat, and GIO side by side will all be DIFFERENT, even though they are made with EXACTLY the same tint. Variance issues are non refundable. Please call us if you have any concerns. We do also try and filter out these issues by inspecting your order. Metallic colours are strongly affected


All cancellations must be provided as soon as possible via phone contact only. We cannot always view emails / messages in a timely manner. Your order can be cancelled on 01454315588 mon>fri 06:30>14:30.  Custom orders such as non stock items, and colours are made to order. If you wish to cancel an order that has a custom item on it, and we have already made it, We will not be able to refund for that item because we cannot return it to "stock".