Shop by Brand
Shop by Price

Angle Sander kit 50>75mm ROLOC twist on Twist Lock Quick Lock

SALE
Angle Sander kit 50>75mm ROLOC twist on  Twist Lock Quick Lock
  Zoom
Our Price:  £55.00
List Price:  £68.00
Saving Of:  £13.00
(Inc. 20% VAT)(£45.83 Exc. VAT)Earn 55 Loyalty Points
+

Brand:  Buzzweld

Availability:  

  

Blaze Twistlock mini flapdiscBlaze Twistlock mini flapdisc
Blaze Twistlock rapid strip paint and rust removalBlaze Twistlock rapid strip paint and rust removal
PCL MALE 1/4 THREAD AIR ADAPTORPCL MALE 1/4 THREAD AIR ADAPTOR
Blaze Twistlock grinding and rust removalBlaze Twistlock grinding and rust removal
Aluminium Oxide Roll On Discs 50MM 80 Grit x20Aluminium Oxide Roll On Discs 50MM 80 Grit x20
  (1 Review)

Buzzweld


A fully featured abrasive kit for sanding and preparing a range of surfaces even those difficult to reach areas.

 

Kit Contains

  • Air Operated angle sander
  • 5x Norton ceramic 36 grip grinding wheels
  • 1x Norton Blaze Rapid Strip 50mm disc
  • 1x Twistlock adaptor with surface interface pad
  • 10x 40Grit sanding pads
  • 1x Norton Ceramic 50MM flap disc
  • 1x 50MM twistlock adaptor
  • 1x 75MM twistlock adaptor

 

Can be used with 50 or 75 abrasives from fine sanding, to buffing, underseal, seam seal removal and more.

 

  • Pad Diameter 3”/75mm + 2"/50mm
  • Pad Thread Size 1/4”
  • Free Speed 16,000RPM
  • Maximum Pad Speed 20,000RPM
  • Operating Pressure 6.3BAR
  • Air Consumption 4CFM
  • Air Inlet 1/4” BSP
  • Vibration Level 3.4m/s2 Max
  • Noise Level 88aD(A) Max
  • Weight 620g
  • Length 153mm
Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
pretty awesome
Friday, 26 July 2019  | 

i have used the black paint discs on angle grinders and they last 5 minutes at best, so didnt hold out much hope for this. I found the blaze disc worked really well even on underseal, and lasted about 5 times longer that the black ones. The only thing i would advise is the the hook and loop sanding discs- you need to use those on the slowest speed setting, otherwise the glus melts. not a problem as such, and saves alot of air so you can use this on a 2hp compressor like i did!

 

This review has not been appraised.


Buzzweld