Buzzweld 06:30 > 14:30 mon> Fri
Chassis Enamel Slow Cure Gloss Extreme for brush / roller
Chassis Enamel Slow Cure Gloss Extreme for brush / roller

Chassis Enamel Slow Cure Gloss Extreme for brush / roller

(Exc. 20% VAT)
(£50.40 Inc. VAT)
Earn 42 Loyalty Points
(10 Reviews)
Example RAL 5002 Ultra Marine Blue

Chassis Enamel Gloss Extreme

Buzzweld marine Chassis EnamelPaint - Chassis Gloss Extreme. 1L & 5L

  • Slow Air Drying - to maintain a wet edge for improved brush / roller finish on Hulls and vehicle bodywork.
  • Available in most colours
  • Excellent Finish, even from a brush
  • Tough finish
  • Can be used for chassis, bumpers, bodywork over an existing painted or primed surface
  • Amazing gloss retention
  • Water and weather resistant.
  • Durable coating
  • Can be combined with non-skid material for steps, rock sliders, decks etc.
  • High chemical resistance.
  • Long Wet Edge for a superb Brush / Roller Finish



  • PLATINUM UPGRADE- The highest grade of Gloss Extreme- Infused with our compound to assist with :-
  • Sound Deadening -Gloss Extreme Now limits sound transfer
  • Resonance Suppression -Gloss Extreme Now actively combats resonance produced from panels
  • Thermal Insulative properties -Gloss Extreme now significantly limits heat loss, and reduces energy required to keep a cab cool.
  • Ceramic -Gloss Extreme is now more resistant to abrasion, gouging and has increased longevity due to increased porosity resistance
  • Increased porosity resistance- Longer life

We recommend Buzzweld Rust Encapsulator for chassis / underbody primer, and epoxy for bodywork


If you request "black" we will amke RAL 9005 Black. Please enter colour name, colour code, and manufacturer of the colour where possible. For example Land Rover LRC 001

10 Reviews:

Amazing coverage
16 June 2024  | 

Used today for the first time. Amazing coverage, sticks to literally anything, just ordered more in black for my axles

Was this helpful to you?  Yes  /  No

Chassis black extreme
25 September 2021  | 

Hand painted on to the inner wings then coated with WAR. The extreme covers easily giving a fantastic finish even by hand. Will protect car for years. Great product.

Was this helpful to you?  Yes  /  No

Buzzweld awesomness
15 April 2020  | 

I'm rebuilding the swivels on a my 90 and wanted to make a proper job of it so ordered chassis black gloss extreme.
It covered the RE amazingly well and the finish is just what I was after, high gloss.
Delivery was super fast too.

Was this helpful to you?  Yes  /  No

14 July 2019  | 

Top class service from start to finish excellent will use again

Was this helpful to you?  Yes  /  No

chassis gloss extreme
13 September 2017  | 

Very good product will be using again

Was this helpful to you?  Yes  /  No

X-Member re-paint
15 January 2017  | 

I have used Hammerite annually for about 7 years on my Defender X-Members but decided to give Buzzweld a whirl this year.
I opted for the the Aerosol so spent a while masking up but has been well worth the time. RCP primer and Chassis Black Gloss and I have great results.
Would happily recommend Buzzweld

1 of 1 people found this review helpful.
Was this helpful to you?  Yes  /  No

Extreme Gloss Chassis Black
04 December 2016  | 

After spraying my rear crossmember with Oxide-X and leaving for 24 hours, i went about painting it with the Extreme Gloss paint, i dont have the facilities to spray,so brushing it on was the only option, i wasn't sure how it would go on, but it went on exceptionally well, leaving a good bright shiny finish, i painted it in early february and it wasn't exactly warm when i did it. Almost a year on its still lasting, and isn't showing any signs of flaking or rust bubbling through. Hoping to order more for my dads 90!


Chassis gloss extreme
18 November 2016  | 

Excellent product, fast drying and fantastic finish! Ideal for chequer plate, wheels etc!

1 of 1 people found this review helpful.
Was this helpful to you?  Yes  /  No

Gloss aerosol
18 November 2016  | 

Used on my TD4 Freelander wheels, excellent finish and used on top of oxide-x! another amazing product from Buzzweld


Extreme Gloss Chassis Black[1]
22 October 2016  | 

This paint was easy to apply with my limited spraying ability, chose to use a gun as opposed to tin as didn't know how much I would need, coverage was excellent & smooth couple of runs but that's my lack of spraying skills not the paints fault, superb high gloss finish & dried within a couple of hours cheers Craig for your help

Related Products

5 Piece Durable Paint Brush Set 12-60mm For All Paint Types
5 Piece Durable Paint Brush Set 12-60mm For All Paint Types

12mm > 60mm pack

Aerosol Nozzles MEGA PACK 20x

Full Selection of nozzles x20


Consists of 

2x Unblocker Nozzles

6x LVLP wide fan nozzles

6x medium flow fan nozzles

6x very high flow round nozzles

Buzzweld 1K Multi-Thinner

Thinner for ALL Buzzweld 1K Products

eio- Etch In One
eio- Etch In One

rapid cure, Sandable etch primer with filling properties. Great as a base coat prior to respray, and for adhesion promotion on galv/ aluminium

Paint Isolator Primer barrier coat aerosol 500ML
Paint Isolator Primer barrier coat aerosol 500ML

Prevents Reactions Between coatings, high coverage.

Rust Reverter- Rust removing solution
Rust Reverter- Rust removing solution
From  £13.11

Cost effective product for dealing with rust!

IMPORTANT TERMS. Read before ordering.

Delivery & returns

All orders are sent to be delivered to you or a neighbour. By Ordering you are accepting responsibility for the delivery location. If this is not acceptable then you MUST leave a note on your order specifying signature only. We do not ship all orders for signature as most people are not available all day to take delivery.We send all orders with DHL.

Cut off time for same day dispatch is 12pm.

Please supply a mobile number to assist the courier.
DHL will attempt delivery twice, after this you may be charged an addition fee.
All orders will only be sent if the billing address matches the card details.
Please ensure someone is available to receive the delivery.
We can not be held responsible for any delays caused by DHL.
If you need assistance with your delivery please call 01454315588. Our staff will be more than happy to help.


We offer a 30 day money back return policy on all goods returned in un-used condition and original packaging. Unfortunately we can not offer refunds or exchange on mixed colours or aerosols to order.

All items must be returned to qualify for a refund. Upon receipt of your item we will check the item and notify you if we are able to process a refund by phone or email within 3 working days.

Once we have despatched your goods (or if you have collected them), you can return them for a full refund (including standard delivery charges) within 30 days of delivery (or collection) without giving a reason, as long as they are with their original packaging and unused. You will be responsible for returning the goods to us (and have to pay any costs involved) and we are allowed to reduce your refund if there is any damage to the goods caused by you handling them. We will make all refunds to the credit card, debit card or PayPal account used to place your order and we will pay you within 14 days of us receiving the goods you have sent them back to us.


We will make your colour to specification, however, when added to different products the colours will be represented differently. As an example Ral3020 in Raptor, 2K Direct Gloss, Basecoat, and GIO side by side will all be DIFFERENT, even though they are made with EXACTLY the same tint. Variance issues are non refundable. Please call us if you have any concerns. We do also try and filter out these issues by inspecting your order. Metallic colours are strongly affected


All cancellations must be provided as soon as possible via phone contact only. We cannot always view emails / messages in a timely manner. Your order can be cancelled on 01454315588 mon>fri 06:30>14:30.  Custom orders such as non stock items, and colours are made to order. If you wish to cancel an order that has a custom item on it, and we have already made it, We will not be able to refund for that item because we cannot return it to "stock".