Buzzweld 06:30 > 14:30 mon> Fri

Chassis Paint Black Satin CIO Chassis In One

£19.00
(Inc. 20% VAT)
(£15.83 Exc. VAT)
Earn 19 Loyalty Points
(94 Reviews)
Size
+
Information

Chassis Paint Black Satin CIO Chassis In One

Targeted at our customers who want a simple, medium term (up to 10 years estimated) solution for protection of Chassis and Underbody compared to our extreme 4 coat dual product system.

Buzzweld CIO is a high adhesion Corrosion stabilising primer and top coat in one.

Buzzweld CIO system requires just two coats to protect your chassis (brush/ schutz applied, more for other application methods)

Benefits-

  1. Contains self-leafing glass flake for extreme abrasion resistance compared to standard coatings.
  2. Double acting on rust! The only coating in the world we are aware of that is both Rust Stabilising, and high in zinc content.
  3. Contains a corrosion inhibiting pigment for class leading, rust prevention by stabilising corrosion to a lower reacting form
  4. Over coating times are as little as 30 minutes, meaning no breaks required between coats in most situations.Designed from the ground up for hand prepared steel.
  5. Primer, and top coat in one. You save significant amounts of time and money with this system that will still outlast most competitors (not our extreme system).
  6. Low Satin / matt finish for oem look.
  7. Suitable for over-painting firmly adherent existing rust.

Chemically modifies rust over time.

 

Buzzweld Chassis In One Options

 

Data Sheet Here

When using aerosols direct to rust / steel /exposed metal for long term protection apply 4>5 coats due to shrinkback from aerosols. read the guides prior to use. ideally stripe coat.

Chassis Paint Black Satin CIO Chassis In One

Thinning
 
Product Types
1000ml Paint Tin
Normal paint tin for brush / roller / thinning and spraying

1000ML Schutz Undercoating Tin
Stubby Schutz Tin. These tins work with our FX10 Spraygun & FX11 Spraygun. The gun screws directly on. To use a normal Schutz gun with a stubby schutz tin, you need to trim the pickup tube 75mm shorter.

5000ml Paint Tin
Normal paint tin for brush / roller / thinning and spraying

400ML Aerosol (traditional)
Traditional aerosol.

400ML Buzzweld Powercan
The Aerosol powercan uses NO THINNER. as a result the can outputs the same amount of paint as a spraygun. This means less coats, a much higher film build and time saved. HOWEVER- the cans empty themselves very quickly. Protection VS coverage. When using a powercan you need to spray from further away. This can can also be used as a textured bedliner spray (comes with two nozzles).
94 Reviews:

Cio
Rating:
06 October 2023  | 

Very good stuff use on top of RE to get the best coverage dries quick and cures to a great hard finish

 
Was this helpful to you?  Yes  /  No

Excellent paint.
Rating:
26 August 2023  | 

I originally bought two tins of brush on paint for my 1988 Land Rover chassis, it was easy to apply and dried to a very nice finish. I then bought some spray cans to get into the numerous areas a brush couldnít easily reach, especially the rear cross member.
Overall Iím very happy with the paint and especially the nice smooth finish.
I will definitely use Buzzweld coatings again.

1 of 1 people found this review helpful.
Was this helpful to you?  Yes  /  No

CHASSIS PAINT BLACK SATIN CIO CHASSIS IN ONE
Rating:
25 August 2023  | 

Fantastic product, does exactly what it says it says it does.

 
Was this helpful to you?  Yes  /  No

CHASSIS PAINT BLACK SATIN CIO CHASSIS IN ONE not as good as hoped
Rating:
16 July 2023  | 

Used this with a rust converter and then applied the paint after letting the converter cure. Worked well on lightly rusted parts but where heavier rust was removed I had what looked like rust coming through again. Not sure if I did anything wrong but applied a wax on top. Bit disapointed

0 of 1 people found this review helpful.
Was this helpful to you?  Yes  /  No

Response:

Hi Peter. Using a rust converter prior to CIO will prevent CIO from doing any stabilisation. So any corrosion resistance will be related to how well that converter worked.

I would advise the following with CIO. Remove any heavy rust, degrease etc. Use a paitn strip disc to prepare the surface and take down the profile (this will help limit breakthrough of rust spotting from a high surface profile)/ stripe coat (see blog, followed by two decent coats of CIO. If using aerosol 4>5 coats. CIO is not porous so whaty you are seeing is the peaks of the mtal underneath being too close to the surface. Typical remedy if there is no blistering, is to lightly scotch tyhe area and apply another coat.


Does what it says on the tin
Rating:
19 June 2023  | 

I've used this stuff for many a job, once you have a tin of it you will use it for all sorts of jobs and not just on your Landy (other vehicles are available).
Remember to order before the old tins is empty.

1 of 1 people found this review helpful.
Was this helpful to you?  Yes  /  No

CIO
Rating:
04 May 2023  | 

Used with RE and WAR as stage 2. These products are very use to use

2 of 2 people found this review helpful.
Was this helpful to you?  Yes  /  No

Powercan
Rating:
24 February 2023  | 

Great product goes onto the chassis amazingly and really easy to use and get into tight spaces

1 of 1 people found this review helpful.
Was this helpful to you?  Yes  /  No

Very easy to use
Rating:
18 February 2023  | 

Used this to coat some chassis components during a rebuild. Clear instructions for prep and application meant the paint went on well and looks really good after two coats.

1 of 1 people found this review helpful.
Was this helpful to you?  Yes  /  No

Easy DIY Application
Rating:
30 October 2022  | 

Great Product, and easy to apply at home.

 
Was this helpful to you?  Yes  /  No

umm
Rating:
24 October 2022  | 

Now, lets get this straight this is a great product with a great finish and fantastic coverage....brilliant!
However I bought this after zero feedback on the web-form, you have so many products it was a guess to choose what I needed, The CIO is not what I wanted for my application, I'm going to have to overpaint with something else. its a shame really

 
Was this helpful to you?  Yes  /  No

Read all 94 customer reviews...

How much do i need?

Aerosol-  minimum 3 coats

  • 1 can per wheel arch
  • 8 cans for a small chassis
  • 14>20 cans for a large chassis

Tinned -minimum two coats

  • 6M2/1000ML
  • 5000ML for a chassis and axles up to 110 size if not pitted/ rough profile. (2.5L if primed)
  • 4m2/1000ML if top coating a rough substrate with no primer 
  • 350ML per wheel arch (using two coats)
:
Related Products

Buzzweld 1K Multi-Thinner
£12.49
(14)

Thinner for ALL Buzzweld 1K Products

SALE
FX10 De-Luxe Schutz Underbody Coating Gun Variable texture
FX10 De-Luxe Schutz Underbody Coating Gun Variable texture
From  £20.00
(3)

External and Internal Budget application gun with spare Schultz can

SALE
Angle Sander kit | General Chassis Preparation
Angle Sander kit | General Chassis Preparation
£84.70
(11)

A selection of useful abrasives complete with air tool that work on general chassis and underbody preparation

Rust Encapsulator Chassis Primer
From  £17.50
(77)

Fast drying, direct to rust and steel Primer for Rustproofing

FX11 De-Luxe Schultz rustproofing and chassis paint gun
From  £29.00
(7)

High quality 360 degree adjustable gun with spare top

IMPORTANT TERMS. Read before ordering.

Delivery & returns
DELIVERY

All orders are sent to be delivered to you or a neighbour. By Ordering you are accepting responsibility for the delivery location. If this is not acceptable then you MUST leave a note on your order specifying signature only. We do not ship all orders for signature as most people are not available all day to take delivery.We send all orders with DHL.

Cut off time for same day dispatch is 12pm.

Please supply a mobile number to assist the courier.
DHL will attempt delivery twice, after this you may be charged an addition fee.
All orders will only be sent if the billing address matches the card details.
Please ensure someone is available to receive the delivery.
We can not be held responsible for any delays caused by DHL.
If you need assistance with your delivery please call 01454315588. Our staff will be more than happy to help.


RETURNS

We offer a 30 day money back return policy on all goods returned in un-used condition and original packaging. Unfortunately we can not offer refunds or exchange on mixed colours or aerosols to order.

All items must be returned to qualify for a refund. Upon receipt of your item we will check the item and notify you if we are able to process a refund by phone or email within 3 working days.

Once we have despatched your goods (or if you have collected them), you can return them for a full refund (including standard delivery charges) within 30 days of delivery (or collection) without giving a reason, as long as they are with their original packaging and unused. You will be responsible for returning the goods to us (and have to pay any costs involved) and we are allowed to reduce your refund if there is any damage to the goods caused by you handling them. We will make all refunds to the credit card, debit card or PayPal account used to place your order and we will pay you within 14 days of us receiving the goods you have sent them back to us.


Colours

We will make your colour to specification, however, when added to different products the colours will be represented differently. As an example Ral3020 in Raptor, 2K Direct Gloss, Basecoat, and GIO side by side will all be DIFFERENT, even though they are made with EXACTLY the same tint. Variance issues are non refundable. Please call us if you have any concerns. We do also try and filter out these issues by inspecting your order. Metallic colours are strongly affected

Cancellations

All cancellations must be provided as soon as possible via phone contact only. We cannot always view emails / messages in a timely manner. Your order can be cancelled on 01454315588 mon>fri 06:30>14:30.  Custom orders such as non stock items, and colours are made to order. If you wish to cancel an order that has a custom item on it, and we have already made it, We will not be able to refund for that item because we cannot return it to "stock".

Brand
Buzzweld