Home > Chassis & Underbody Coatings > Hard Paints
Zinc Rich Primer Explained
Zinc Rich Primer Testing Update
Molten ZInc is our Cold Galvanising Solution.
Save up to 10% more by ordering in quantities of 2, 6, 12, 48
(Details shown apply to the default selection)
Very high zinc content primer, with a Specific gravity of nearly 2.5KG per liter!.
Cold Galvanising "Molten Zinc" is a high quality, durable high adhesion primer for protecting prepared steel, and repairing galvanised coatings, and zinc rich Epoxy primers.
Really good coverage tin lasts forever, no clogging, just make sure you shake it really well. Very pleased.
Was this helpful to you? Yes / No
This review has not been appraised.
The first time I used this I applied a bit too much to a few areas I was welding. However after some advice from Craig on how much I should look to use prior to welding it's worked perfectly. One thick-ish coat before welding and jobs a good 'un. Thanks again 🙂
1 of 1 people found this review helpful.
If you put this on with a few coats it will affect weldability, but one or two decent coats and you get zero burn back, and no interference with the weld. at 90% zinc its now our go to weld through primer.
Buzzweld 1K Multi-ThinnerFrom: £12.49
Thinner for ALL Buzzweld 1K Products
Classic Chassis Black Gloss OEM mid gloss sheen SeriesFrom: £12.49
Glass impregnated gloss black for tough finishing or underbody components such as chassis and suspension.
Galvanised Chassis Paint Galv In One GIOFrom: £11.00
GIO, Direct to new galv.
Rust PrimerFrom: £17.00
Rust Converter- Cost effective product for dealing with rust!