Home > Chassis & Underbody Coatings > Underbody Rustproofing Waxes
If you require Black war WITH Sound deadening you must order the "tintable" version in Black.
Want this Product in a KIT?
Step By Step Rustproofing Guide
Choose A Colour
WAR can now be used with our RAL colour Raptor / GIO & DTM Tints. so you can purchase a bulk amount of tint from us, and use that with multiple products. You need 10% tint. so 100ML TINT per 1000ML of product.
Save up to 10% more by ordering in quantities of 2, 6, 12, 48
(Details shown apply to the default selection)
WAR is not only superb for underbody use when rustproofing a chassis, undersealing, sound deadening resonance suppression, Thermal insulation and preventing further Rust forming, but also as a cavity wax for protecting hard to reach areas.
WAR. is a tough, touch dry, impact and abrasive resistant underbody coating. WAR has a number of unique features that ensure it will outlast a wet wax, and most coatings, all the while being incredibly simple and convenient to apply and use.
By selecting the Sound/ Thermal / GF option you are purchasing the highest grade of WAR we can produce. It still has the same anti-corrosive and rustproofing qualities. The Sound / Resonance and Thermal benefits do improve with the thickness of the coating, so an aerosol is less effective (although still effective). For ultimate sound and thermal insulation we recommend applying WAR over Lizardskin.
WAR Full Product Guide here
Great product for home DIY restoration work no fuss no mess dose exactly what you want to do with it. Great finish with minimal amount of work. Making my mgb gt restoration work very easy.Thanks for the great service and excellent customer support.
Was this helpful to you? Yes / No
This review has not been appraised.
I recently bought the war shultz product for my discovery 1 to add some protection to the chassis and underside. I have used paint in the past over these areas but always found that the paint would fail after a while. So i decided to try this product out u had striped the axle of and rear floor and tank for better access whilst i was doing it. I didnt want to use waxoyl as its horrible when you are working on your landy as it doesnt dry and gets all over you. This product is amazing and goes on really easy with the shultz gun and dries brilliant i wont be going anywhere else from now on for my underbody protection. The comunication from buzzweld is also brilliant and deliveey is super fast .
I'm a restoration engineer and I drive older/classic cars as daily drives. As they get used all year round they need protection and let's face it, who wants to keep doing the same job over and over? Buzzweld products are well thought out and excellent quality, the methods of application are suitable for both the workshop equipped professional and driveway DIY'er. WAR is no exception. Not only is it the best at what it does, it looks good too. Lastly, as with all Buzzweld products the customer service is absolutely grade A. They get your items dispatched quickly and safely and any questions are met with a fantastic product knowledge that only comes from really being "hands on" with the products, not just buying stuff in and sticking a label on it.
I was looking for a underseal I could paint on as I used Upol raptor but didn't like the finish it left and found it hard to spray into small gaps and get a even finish . I gave the people at buzz weld a call and explained what I needed and they recommended the WAR , I asked could they make a custom purple and when I received it I was very pleased with the colour . I followed the advice on preparation and it went on like a dream , if you have no experience with spraying or don't have the space to spray I would highly recommend WAR as it's so easy to use any home DIY ER can use it .
My 5 year old Disco 4 had started to develop light surface rust on the principle chassis beams, especially in the area of the spare wheel (with the spare wheel out). Having owned a Defender and currently a Series3, I decided to get ontop of the surface rust early. Using a garden sprinkler, I spent a day hosing the chassis down paying particular attention to the area around the rear seating area and boot. Really, this meant placing the sprinkler under certain areas for an hour or so, whilst watchin the test cricket. It appears allot of dirt comes off the front tyres and gets jammed up at the back. I spent a day doing this all around the car. Following day, I wiped the chassis down with numerous microclothes and degreaser. I then rust treated with tannic acid product. As promised by Craig, my 4x aerosol of WAR arrived. The two nozzle options are clever. Being used to wax oil, I chucked all 4 in a bucket of hot water. With the chassis now dry and tannic acid process finished, I sprayed WAR everywhere! Wow, what a great product. It does leave a dry, matt hard finish. It dried within 20 minutes. Having used Dinitrol and Wax Oil, WAR is a superior product due to its toughness, DIY low level preparation, and for me, the ease of aerosol spraying. I could spray think with one nossle or light with the other. I will now do this home DIY rust prevention each year.
1 of 1 people found this review helpful.
Very impressed it Super easy to apply using the Schultz gun with great coverage and a great finish.
Just wanted to give a shout out to the team at Buzzweld for the amazing advice and service I have received during what is an incredibly busy time for them. I message Craig to ask for WAR colour match of pure white, his reply was we'll try but it will probably be bit cream since this was for the underside of my truck bed I figured I can live with that. To my surprise when my order arrived today I have a hand written note on my invoice to say they had overdosed it with white tint and to make sure I heated it and shook REALLY well. I did and this was the result a perfect match for the pure white I asked for and not a hint of cream insight. I can think of a ton of companies who would had said they could do this and underdelivered but Buzzweld managed my expectations and then smashed it! Thanks team!
2 of 2 people found this review helpful.
this means alot Josh. and thank you. we always try to under promise and over deliver. We don't always manage it, but even then we stand by what we do. thank you for taking the time to provide us feedback.
Ok, so I have used WAR before, on my Land Rover Series 1 80" build. I used it in the cavities of the chassis, great stuff, gets everywhere!!I recently started doing up my R53 Mini as the rear had suffered a good amount of corrosion after years on British roads and picking up the salt. After cleaning up the metal work and laying two coats of RE, then Lizard Skin I finished with a couple of coats of WAR. I could have left it in black, but to be different I got Craig to tint the WAR and the results are awesome! I am thinking of painting the whole car in the same colour!!For a viewing of the results you can look it up here: https://www.youtube.com/channel/UCRbbqOxvZJhgE1qGU_RYQmw
I have used a lot off buzzwelds products this year working on my landrover and they all seem perfect for the job, easy to use! I chose to use aerosols as i was limited on power and space but they seem to give give a great coat and telly good coverage per aerosol! Thankyou buzzweld for making a usally horrible job not that bad !
This stuff is brilliant.... have used this on my defender 6x6 custom build.... well have pretty much used only Buzz weld products all are great... Build is being done outdoors & as of yet no rust... brilliant products & super quick delivery... even during the Covid crisis.
Read all 24 customer reviews...
Aerosol- minimum 3 coats
Tinned -minimum two coats
Buzzweld 1K Multi-ThinnerFrom: £12.49
Thinner for ALL Buzzweld 1K Products
Chassis In One CIO Schutz chassis paint rustproofing KitFrom: £250.00
Full Schutz Applied chassis kit.
Angle Sander kit | General Chassis Preparation£84.70
A selection of useful abrasives complete with air tool that work on general chassis and underbody preparation
Heavy Duty Underbody Spray Gun PCL£69.45 £39.99
Variable nozzle, output, heavy Duty, and comes with a large bore 900MM lance for cavity.
FX11 De-Luxe Schultz rustproofing and chassis paint gunFrom: £29.00
High quality 360 degree adjustable gun with spare top
FX10 De-Luxe Schutz Underbody Coating Gun shutzFrom: £19.00
External and Internal Budget application gun with spare Schultz can
Rust Primer Rust ConverterFrom: £18.00
Rust Converter- Cost effective product for dealing with rust!
Aerosol Cavity extension Lance 360 degree sprayer£4.00
600mm Extended Nozzle lance for use with all of our cavity treatment aerosols.